Performing A Hard Reset; Hold Switch - Sony PEG-TJ25 CLIE Handbook (primary manual) Operating Instructions Manual

Performing a hard reset

If the soft reset does not solve the problem, you may need to perform a hard
reset to restart your CLIÉ handheld.
Notes
• All records and add-on applications stored on your CLIÉ
handheld will be erased by performing a hard reset.
• Perform a hard reset only if a soft reset does not solve the problem.
However, you can restore the data if you have made a backup on your computer
via the HotSync
* Note that some data cannot be backed up.
b
For details, refer to "Backing up your CLIE™ handheld data and applications"
in "Handbook" (PDF format).
1
Slide down and hold the POWER/HOLD switch.
2
Press the RESET button gently with the stylus, and then
release the stylus.
Note
Keep the POWER/HOLD switch held down.
3
Wait for more than three seconds after the palm
POWERED screen is displayed, and release the POWER/

HOLD switch.

A message "Erase all data?" is displayed.
®
operation*.
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
33