Analog Outputs; Room Sensors; Bacviews - Automated Logic SE6166 Technical Instructions

Table of Contents

Advertisement

Analog outputs

The SE6166 has 6 analog outputs that support voltage or current devices. The controlled
device must share the same ground as the controller and have the following resistance to
ground:
0–10 Vdc
0–20 mA
NOTE The SE6166 supervises all outputs.

Room sensors

RS sensors
You can wire RS sensors to the SE6166's Rnet port. An Rnet can consist of any of the
following combinations of devices wired in a daisy-chain or star configuration:
LogiStats
You can wire a LogiStat or LogiStat Plus to the SE6166's LogiStat port.
NOTES

BACviews

You can wire a BACview
to view or edit some of its property values or its real time clock. See Room sensors above
for Rnet configurations. See the BACview
(http://accounts.automatedlogic.com) or BACview
(http://accounts.automatedlogic.com) for installation instructions.
To start up and troubleshoot the SE6166, you can temporarily connect the following items
to its Local Access port:
NOTE Before you can use the BACview
BACview with the SE6166, you must create a BACview screen file in ViewBuilder, enter
the screen file name in the controller's Properties box in SiteBuilder, and then download
the control program to the SE6166.
SE6166 Controller • Rev. 4/13/2011
min 500 Ohms
max 800 Ohms
1 RS Plus, RS Pro, or RS Pro-F
1–4 RS Standards
1–4 RS Standards, and 1 RS Plus, RS Pro, or RS Pro-F
Any of the above combinations, plus up to 2 BACviews, but no more than 6 devices
total. See BACviews below.
The SE6166 does not support the LogiStat Pro.
A LogiStat or LogiStat Plus wired to the SE6166 cannot be used for local access.
If you use the Rnet port, you cannot connect a LogiStat sensor to the LogiStat port.
or BACview
5
The BACview
Handheld. See its Technical Instructions
6
(http://accounts.automatedlogic.com).
A laptop running the Virtual BACview software. Virtual BACview software simulates the
BACview
and is included with WebCTRL v4 or later.
6
keypad/display unit to the Rnet port of the SE6166
6
Hardware Setup Guide
5
Hardware Setup Guide
6
, BACview
, BACview
5
6
4
© 2011 Automated Logic Corporation
Handheld, or Virtual
6

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SE6166 and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF