Advertisement
Quick Links
CR-10mini Series 3D Printer User
Manual
User Manual is for the CR-10 Series of 3D printers. It is also
applicable for the CR-10S/CR-10 S4/CR-10 S5.
But CR-10 mini without T-Bracket (Right) & Decoration Strip.
Due to the different types of devices ,Hardware and software upgrade. the
devices have little different, it is normal phenomenon. Subject to actual
device received.
Detailed instructions for using are available in the TF card.
V.6.0
Advertisement
Related Manuals for Creality3D CR-10mini Series
Summary of Contents for Creality3D CR-10mini Series
- Page 1 CR-10mini Series 3D Printer User Manual User Manual is for the CR-10 Series of 3D printers. It is also applicable for the CR-10S/CR-10 S4/CR-10 S5. But CR-10 mini without T-Bracket (Right) & Decoration Strip. Due to the different types of devices ,Hardware and software upgrade. the devices have little different, it is normal phenomenon.
- Page 2 Parameters Basic Parameters Model CR-10 CR-10S CR-10 S4 CR-10 S5 CR-10mini Printing Size 300*300*400mm 300*300*400mm 400*400*400mm 500*500*500mm 300*220*300mm Molding Tech. Nozzle Number Slice Thickness 0.1mm-0.4mm Nozzle Diameter Standard 0.4mm Precision ±0.1mm Fliament 1.75mm PLA File Format STL/OBJ/AMF Working Mode Online or TF card offline Slice Software Creality Slicer/Cura/Repetier-Host/Simplify3D Input:AC 115V/230V 50/60Hz...
-
Page 3: Table Of Contents
For a better experience in using our product, you may learn how to use the Printer in the following ways: View the accompanied instructions and videos in the TF card. Visit our official website www.creality3d.cn You will find relevant software/hardware information, contact details and operation and maintenance instructions on the website. - Page 4 NOTES Do not use the printer any way other than described herein in order to avoid personal injury or property damage. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
-
Page 5: Introduction
A、 Introduction Filament Holder Control Box Nozzle Assembly Connection Platform Connection Power Cable Connection Extruder (E) Stepper Z Gantry Frame X Limit Switch Nozzle Kit X Stepper TF Slot and USB Port Z Stepper Display Screen Control Knob Z Limit Switch Voltage Selection Base Frame Y Limit Switch... -
Page 6: General List
B、 General List Tool Box Base Frame Control Box Gantry Frame Tool list Image Name Image Name Image Name Spool & Nuts 1set Power Cable Spade Spool Holder USB Cable Cable Ties 1set TF Card & Card PTFE Tubing Hex keys, Wrench 1set 1set Reader... -
Page 7: Device Installion
C、 Device Installtion u Install the T-shaped fixing block. u Install the Gantry Frame Note: Make sure that the nut for pro file h a s b e e n t u r n e d b y 9 0 ° before fastening the T-shaped fixing block. - Page 8 ◆ Install the Rack Attach the Bracket Attach Spool Holder Finished with two thumb screws. with included Nuts ◆ Install decoration strip Install decoration belt into the Attach the Decorative Trim to all Cut off the excess material with notch, starting from one end. parts needing to be decorated.
- Page 9 D、 Introduction Connect the Stepper Motors according to the yellow labels on the 6pin (4-wire) side. Y Stepper and Limit Switch Connect the Limit Switches according to the Extruder (E) Stepper yellow labels on the 3pin (2-wire) side. X Stepper and Limit Switch Z Stepper and Limit Switch Connect the aviation connectors to the ports with corresponding pins...
-
Page 10: Screen Information
E、 Screen Information Push：OK/Enter Sub Menu Turn：Change Option/Value Set Temperature of Print Speed the Nozzle Current Temperature of the Nozzle Device Model Set Temperature of the Hot Bed Current Temperature of the Hot Bed Part Cooling Fan Speed Current Location of the nozzle Print Time Print Progress... -
Page 11: Loading Filament
F、 Loading Filament 2、Feed Filament 1、Preheat Method 1 Press and hold the extruder lever then insert the1.75mm filament through the small hole of the extruder. Continue feeding until you see filament come out Method 2 the nozzle. Tip：How to Replace the Filament？ 1、Cutting filament near the Extruder and slowly feed new filament until they are fed into the new filament. - Page 12 G、 Bed Leveling 1. Prepare →Auto Home. Waiting for the nozzle to move to the left/front of the platform.→ Prepare→Disable Steppers(Close stepper drive，release motor） 1111111 11111 The nozzle is too far away from the platform, so the consumables can not adhere to the platform.
-
Page 13: Software Installation
H、 Software Installation 1. Double click to install the software. 2、Double click to 3. Select language→Next→Select your machine→Next→Finish. open the software. - Page 14 I、 First Printing 1.Slicing Open the software→Load→Select the file→Wait for slicing to finish ,and save the gcode file to TF card. 2.Printing Insert the TF card→ Print → Select the file to be printed.
- Page 15 After- Sales Service (3) Equipment failure or damage caused by unauthorized modification Service of the equipment (private modification includes: 1. modification of the nozzle assembly; 2. modification of the machine structure; 3. use 1, The printer can be returned within seven days, 15 days replacement, of third-party components;...
- Page 16 The revision date: April 24,2019 SHENZHEN CREALITY 3D TECHNOLOGY CO.,LTD. 11F & Room 1201,Block 3,JinChengYuan,Tongsheng Community,Dal ang,Longhua District,Shenzhen,China,518109 Official Website: www.creality3d.cn Tel: +86 755-2105 9455 E-mail: info@creality3d.cn cs@creality3d.cn...
Need help?
Do you have a question about the CR-10mini Series and is the answer not in the manual?
Questions and answers