Configuration Of The Encoder Via The Parameter Access Point; Figure 12: Connection From The Plc To Afs60A Or Afm60A; Figure 13: Configuration Data - SICK AFS60 PROFINET Operating Instructions Manual

4 COMMISSIONING
4.4

Configuration of the encoder via the Parameter Access Point

OPERATING INSTRUCTIONS | AFS60/AFM60 PROFINET
46
Add the device AFS60A or AFM60A to the Network view using drag-and-drop.


Figure 12: Connection from the PLC to AFS60A or AFM60A

Using the mouse, drag a connection from the control system icon to the encoder

icon.
Mark the encoder icon and in the Device view, change the configuration data and the
vendor specific configuration data in the middle window at the bottom in Parameter
Access Point. For the possible parameter settings, see section 3.6 on page 37.
Configuration data

Figure 13: Configuration data

The AFS60/AFM60 PROFINET is supplied with the configuration data shown.
8015078/145N/2019-05-24 | SICK STEGMANN
Subject to change without notice