Philips 24BDL4151T User Manual page 34

[Manager Email]
Specify the destination address to receive the e-mail.
[Test]
To check if your e-mail settings are correct, select 'Send Test Mail"
to send a test e-mail.
[FTP]
Click the checkbox to enable/disable the FTP server feature. After
enabling this feature, you can setup account, password and port
number.
[Account]
The user name to log in the FTP server. The length of the account
name should be ranged from 4 to 20 characters, only [a-z], [A-Z]
and [0-9] are allowed to use.
[ Password]
The password to log in the FTP server. The length of the
password should be ranged from 6 to 20 characters, only [a-
z], [A-Z] and [0-9] are allowed to use. The password are hidden
under asterisks after setting.
[Storage path]
The FTP server has access to the internal storage only. The
storage path is unchangeable.
[Port]
The port number of the FTP server. The available port number
ranges from 1025 to 65535. The default setting is 2121.
Note:
The following port numbers cannot be used:
8000 / 9988 / 15220 / 28123 / 28124 and SICP network port (the
default setting is 5000).
[Remote Control]
Click the checkbox "Enable" to enable or disable the remote control
client service. The default setting is "Enabled". To use the remote
control feature, the device must be bound with the remote control
server.
In the entry field of "Server", input the URL address with the prefix
of "https://". If the device is not bound with the remote control
server, please enter the PIN code provided by the server.
Bind status:
(1) I f the device does not have appropriate network connection,
a message "Network is disconnected" will appear.
(2) If the device is equipped with network function, but is not
connected to the remote control server, a message "Server is
disconnected" will appear.
(3) I f the server is connected, but not bound, a message "Server
is unbinded" will appear.
(4) I f the device is bound with the server successfully, a message
"Server is binded" will appear.
(5) If the PIN code is not correct, a message "Error PIN code"
will appear.
4.4.3. Source Settings
[Media Player]
See 3.3. Media Player
[Browser]
See 3.4. Browser
[CMND & Play]
See 3.6. CMND & Play
PDF Player
See 3.5. PDF Player
Custom App
See 3.7. Custom App
4.4.4. Network application
[Proxy]
Enable the proxy server by clicking the checkbox of "Enable". The
user can set up the host IP and port number of the proxy server.
The default setting is "Disabled".
The proxy types supported by the device are HTTP, HTTPS,
SOCKS4 and SOCKS5. Select your proxy server from the
following options:
19
24BDL4151T