Advertisement
De'Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com
Proudly distributed by
De'Longhi Australia Pty Limited
P.O. BOX 4540
CASULA MALL NSW 2170
Customer Service Ph: 1800 126 659
Fax: 1800 706932
www.delonghi.com.au
e-mail: info.au@delonghigroup.com
De'Longhi New Zealand Limited
99 Khyber Pass Road
Grafton 1023
Auckland, New Zealand
P.O. Box 58-056 Botany
MANUKAU 2163
Customer Service Ph: 0508 200 300
Fax: 0508 200 301
www.delonghi.co.nz
e-mail: info.nz@delonghigroup.com
Advertisement
Table of Contents
Related Manuals for DeLonghi HFX60V20
Summary of Contents for DeLonghi HFX60V20
- Page 1 De’Longhi New Zealand Limited 99 Khyber Pass Road Grafton 1023 Auckland, New Zealand P.O. Box 58-056 Botany MANUKAU 2163 Customer Service Ph: 0508 200 300 Fax: 0508 200 301 www.delonghi.co.nz e-mail: info.nz@delonghigroup.com De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com...
- Page 2 HFX60V20 CERAMIC FAN HEATER Instructions for use...
-
Page 4: Important Safeguards
IMPORTANT SAFEGUARDS rooms when they are occupied by per- sons that are not capable of leaving Danger! the room, unless constant supervision Failure to observe the warning may result in life threatening is provided. injury by electric shock. - The appliance must not be placed im- Danger of burns!! mediately under a fixed power socket. -
Page 5: Installation
The appliance emits a beep and a dot flashes on the Heating 1 and Heating 2 display. The appliance resumes operation a few seconds In this operating mode you can set the desired tempera- after being placed in an upright position again. ture by pressing the + and - adjustment buttons (B). -
Page 6: Technical Characteristics
When the programmed time as been reached the appliance ter, remove the grille by pulling outward. Blow it lightly, shuts off automatically. If you want to go back to operation then replace it into the appliance. without the timer, press the timer button (E) twice. The timer symbol disappears from the display. -
Page 7: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE SOLUTION Temperature sensor is not working Please contact Customer Service PF display and emits a beep properly Product doesn’t turn on Check that the plug is connected to the Plug in outlet Auto-start is on Wait till time elapsed or press the but- ton (E) twice to cancel the auto-start and push the button (A) Room temperature reaches the set...
Need help?
Do you have a question about the HFX60V20 and is the answer not in the manual?
Questions and answers