Claim Device On Ovrc; Discover And Update Soundbar Streaming Feature; Connect Devices; Discover And Update Devices - SnapAV Autonomic e Series User Manual

Claim Device on OvrC

To claim the device on OvrC:
Connect to your customer's network.
1.
Go to www.OvrC.com.
2.
Log in to your account or create an account.
3.
Create the customer by clicking
4.
Click +Device and enter the

Connect Devices

5.
Claim all other devices on the network.
6.

Discover and Update Devices

Go to setup.tunebridge.com.
1.
device that is connected to the same network. All local
streamers will be discovered.
Click on Config next to a streamer to open it's UI.
2.
Without making any other changes, click on the
3.
Tab once the UI opens to update the firmware if an update
is available.
Repeat steps 1-3 for each streamer if more than one is in
4.
the system.
Play Music
Go to setup.tunebridge.com.
1.
device that is connected to the same network. All local
streamers will be discovered.
Click Control next to any of the discovered streamers. The
2.
Mirage Web UI will load.
• You may need to enable Flash.
Turn on the zone you want to play content in.
3.
If using eSeries amps:
Zones
• Select , then click the power button next to the zone
you want to turn on.
Zones
• Click , then select
Click Streaming.
4.
If using non-eSeries or non-Autonomic amplifiers:
Scroll the services list down and select
5.
(TuneIn is a free service that does not require any login).
Select Local Radio.
6.
Click FM.
7.
Click one of the first stations in the list.
8.
Congratulations! Music should begin playing in the previously selected zone (or the first physical output if physically connected
9.
amp).
Add Customer and input the customer's information.
MAC Address and Serial Number
from a browser or mobile
Firmware
from a browser or mobile
player A
.
TuneIn Radio.
for the device to claim the device.
15