Details For 24 Vdc Mating Connector; Procedure For Creating 24 Vdc Cable - Omron Viper 650 User Manual

Vendor Name
OMRON
OMRON
OMRON
OMRON

Details for 24 VDC Mating Connector

The 24 VDC mating connector and two pins are supplied with each system. They are shipped
in the cable/accessories box.
Connector Details
A
B
A: Ground (pin 1, labeled on under side)
B : +24 VDC
Pin Details
Recommended crimping tool, Molex Hand
Crimper
NOTE: The 24 VDC cable is not supplied with the system, but is available in
the optional Power Cable kit. See List of Cables and Parts on page 58.

Procedure for Creating 24 VDC Cable

1. Locate the connector and pins from the preceding table.
2. Use shielded two-conductor cable with 14-16 AWG wire to create the 24 VDC cable.
Select the wire length to safely reach from the user-supplied 24 VDC power supply to
the eMB-40/60R base.
05173-060 M
Table 5-3. Recommended 24 VDC Power Supplies
Model
S8FS-G15024C
S8FS-G15024CD
S8VK-S24024C
S8VK-S24024CD
Table 5-4. 24 VDC Mating Connector Specs
Viper 650/850 Robot with eMB-40/60R User's Guide
Chapter 5: System Installation
Ratings
24 VDC, 6.5 A, 150 W
24 VDC, 6.5 A, 150 W
24 VDC, 10 A, 240 W
24 VDC, 10 A, 240 W
Connector receptacle, 2 position, type:
Molex Saber, 18 A, 2-Pin
Molex P/N 44441-2002
Digi-Key P/N WM18463-ND
Molex connector crimp terminal,
female, 14-18 AWG
Molex P/N 43375-0001
Digi-Key P/N WM18493-ND
Molex P/N 63811-0400
Digi-Key P/N WM9907-ND
Mount
Front Mount
DIN-Rail Mount
Front Mount
DIN-Rail Mount
71