Page 2
The Slam 2 is rated IPX5. This means that the Slam 2 is splash resistant, but is not impervious to large amounts of water. Please make sure that the protective rubber cover is secure. If the Slam 2 has got Box contents damp/wet during use, we recommend drying it off to help prevent any damage from occurring.
Page 3
• 3. Follow the ‘Pairing the speaker to your device’ instructions The Slam 2 will automatically enter pairing mode if a previously paired device is not detected • The Input indicator LED (5) will flash blue whilst in pairing mode •...
Page 4
95% volume. Some devices output higher than others, so you may need to reduce the volume if you experience distortion. Taking calls with the Slam 2 is only activated while connected via Bluetooth to your device. To be heard clearly, please speak towards the built-in Microphone (6).
Bluetooth range up to 10 m Open up the Slam 2. There are no user serviceable parts inside • Expose the Slam 2 to extreme temperatures or rapid changes of hot to cold or vice versa 69 dB • Frequency response 60 Hz –...
Troubleshooting The use and operation of this speaker is beyond our control. Warranty of the KS SLAM 2 is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances.
Need help?
Do you have a question about the SLAM 2 and is the answer not in the manual?
Questions and answers