Related Manuals for Dream On Me 365
Summary of Contents for Dream On Me 365
- Page 1 Convertible Rider Instruction Important: Keep these instructions for future reference. This product is designed to comply with USA Standard: ASTM F833-15 Safe Cozy Fashionable...
- Page 2 • STROLLER TO BE USED only at walking speed. Product not intended for use while jogging, skating, etc. • CAREGIVER MUST always help child get into and out of the stroller. • ITEM NO.: #365 • The Rider stroller has been approved in accordance with ASTM F833: 15.
- Page 3 WARNING THE STROLLER IS DESIGNED FOR USE ON FLAT OR GENTLY SLOPING SURFACES, AND MAY BE UNSTABLE ON HIGHER SLOPING AND UNEVEN SURFACES AND USERS SHOULD BE AWARE OF THE POSSIBILITY OF THE STROLLER ROLLING AWAY OR TIPPING OVER. • WITH YOUR HAND THROUGH THE WRIST TETHER STRAP LOOP, PUSH THE STROLLER HOLDING BOTH HANDLES.
-
Page 4: Manual Handling Techniques
WARNING MANUAL HANDLING TECHNIQUES The SMART lifting technique This technique can be used to pick up small light loads from low levels. Size up the Load • Assess the load (size, shape and weight). • Assess whether the load needs to be moved; •... -
Page 5: Parts List
PARTS LIST Adjust Button Handle Handle Tube Seat Folding Plastic Guard Rail 2nd Lock Guard Rail Support Harness Storage Latch Brake Rear Wheel Join Point Front Wheels Frame Seat Guard Rail Connecter Front Wheel L & R Rear Wheel L & R T-Bar Simple Seat... - Page 6 1.ASSEMBLE THE RIDER (1)Open storage latch, refer to Fig. A, then Lift handle of stroller up, refer to Fig B. (2)Lift handle of stroller up until you hear a “Click”, refer to Fig C/D, CHECK that the stroller is completely latched every time you open the stroller and before continuing with the rest of the assembly steps.
- Page 7 2.ASSEMBLY THE SEAT (5) Insert Guard Rail Support through the hole in Seat and make sure the seat back is on the inside of the Gruard Rail as Fig. A. Fix the Backrest to the Guard Rail with the two buckles as shown in Fig.
- Page 8 3.FOLD THE RIDER (9)Press the Guard Rail Support Button and take the Guard Rail Support out, then put into seat as shown in Fig. A/B. (10) Press the Handle Adjust Button and push the handle downward as shown in Fig. C/ (11) Press the 2nd Lock and pull the Folding Plastic upward Folding...
- Page 9 4. SECURING YOUR CHILD TO HARNESS WARNING: USE THE HARNESS AT ALL TIMES. When not in use disconnect shoulder straps from the waist strap and fasten buckle to prevent strangulation. A five point harness is provided to secure your child. Buckle tongues are available separately for added safety.
-
Page 10: Using The Brakes
5. SECURING YOUR CHILD TO HARNESS (16) Tighten or loosen the Shoulder strap, hold and lift the slider and then pull the harness strap, to adjust to the desired fit. The waist strap needs to fit firmly around the child (Fig D). (17) To release the buckle. - Page 11 8. USE T-Bar GUARD RAIL ONLY (20) Detach the Guard Rail from Guard Rail Support Tube as shown in Fig A. (21) Press the T-Bar quick release button and then put T-Bar into Guard Rail Support Tube as shown in Fig. B. 9.
- Page 12 10. CONNECT THE RIDER TO BABY STROLLER The connector is designed to be a universal parts. It can be used for most baby strollers to convert the stroller into a rider+stroller. (22) Press the connecter quick release botton and then connect to rider join point as shown in Fig.
-
Page 13: Care And Maintenance
• To maintain the safety of your nursery product, seek prompt repairs for bent, torn, worn or broken parts. IMPORTED BY: DREAM ON ME INC. 1532 SOUTH WASHINGTON AVE PISCATAWAY TWP NJ 00854 USA. For customer service, warranty information or replacement parts, please call us at: 732-752-7220 or visit us online at: www.dreamonme.com...
Need help?
Do you have a question about the 365 and is the answer not in the manual?
Questions and answers