4.1.12
Bypass tray unit (Removing tray arm)
(1)
Secure the sliding section of the tray arm,
and then remove the tray arm by pulling its
joint up.
The tray can be easily taken out by lifting up
its leading edge with the sliding section
secured.
4.1.13
Duplexing unit front cover
(1)
Open the duplexing unit.
(2)
Remove the tray arms.
P. 4-5"4.1.12 Bypass tray unit (Removing
tray arm)"
(3)
Remove 3 screws and take off the duplexing
unit front cover.
4.1.14
Duplexing unit rear cover
(1)
Open the duplexing unit.
(2)
Remove the tray arms.
P. 4-5"4.1.12 Bypass tray unit (Removing
tray arm)"
(3)
Remove 3 screws and take off the duplexing
unit rear cover.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-12
Fig. 4-13
Fig. 4-14
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 5
Joint
Secure here
Tray arm
DISASSEMBLY and REPLACEMENT
4