Advertisement
MOVING & LIFTING THE MONITOR
- When holding the monitor, the screen should face away
from you to prevent it being scratched.
Adjusting the Stand Height
1) Place the monitor mounted on the stand base
in an upright position.
2) Pull out the locking pin at the bottom
rear of the stand body.
3) The height can be adjusted up to
130.0 mm (5.2 in.)
Caution – Once the pin is removed, it is not
necessary to re-insert it to adjust the height.
Warning – Do not put your fingers
or hand between the screen and
the base (chassis) when adjusting
the screen's height.
Adjusting the Angle
1) Place the monitor in an upright position,
mounted on the stand base.
2) Adjust the angle of the screen. The angle of the screen
can be adjusted forwards or backwards from -5° to 20°
for a comfortable viewing experience.
Warning – To avoid injury to the fingers when adjusting the screen,
do not hold the lower part of the monitor's frame as illustrated below.
Advertisement
