Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18j
Advertisement
Table of Contents
Related Manuals for QUINN 64915
Summary of Contents for QUINN 64915
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Specifications
Do not expose to heat, humidity, or direct sunlight for a long period. Page 2 For technical questions, please call 1-888-866-5797. Item 64915 64916... -
Page 3: Operation
2. Leave the Wrench in its case, or laying horizontally on a stable surface while turning on. If the Wrench is moved or its anvil turned when first turned on, readings may be inaccurate. Item 64915 64916 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Advanced Settings
3. Use Up/Down Buttons to select When a measurement is deleted a Saved Measurement. will be displayed briefly. 5. Press Fn Button again to display and exit Saved Measurement mode. Page 4 For technical questions, please call 1-888-866-5797. Item 64915 64916... -
Page 5: Measuring Angles
Note: The display will alternate between current torque Note: Angle will be measured when at least 5% and current angle when target angle has been reached. of maximum operation torque is reached. Item 64915 64916 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: After Use
• cracked or broken parts, and • any other condition that may 4. Remove batteries before storage. affect its safe operation. Note: Replacement parts are not available. Page 6 For technical questions, please call 1-888-866-5797. Item 64915 64916... -
Page 7: Troubleshooting
The Wrench has no Delete previously saved measurements to Display shows memory available to save allow new measurements to be saved. instead of saving torque new measurements. or angle measurements. Item 64915 64916 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 64915 and is the answer not in the manual?
Questions and answers
Does this torque wrench work on left handed threads as well?
Yes, the QUINN torque wrench with part number 64915 works on left-handed threads. The specifications indicate a torque accuracy of ±3% clockwise (CW) and ±4% counterclockwise (CCW), meaning it can apply torque in both directions.
This answer is automatically generated
I find the instructions very confusing and hard to follow. For example, I still can't figure out how to delete the pre-set values. I also don't know how to record and save (and then delete) the peak value when I have completed the tightening sequence. I really like the wrench and the quality seems good, but I **** very frustrated with the lack of clarity of the instructions.