Chef Connect - Cafe TC051K6CA-S GE Quick Manual

Table of Contents

Advertisement

Features May Differ by Model.
For more details about how to use your new appliance, please consult the full Owner's Manual - information on front
cover.

Chef Connect

Chef Connect
Use the Chef Connect feature for connecting your micro-
wave to a Café range to sync your vent fan, cooktop sur-
face lights and clock via Bluetooth technology.
1. You must have a Chef Connect enabled range. To pair
your microwave for the first time, initiate the Chef Con-
nect process on the Café range. Refer to the range own-
er's manual for instructions
2. On the microwave, hold Chef Connect button for 3
seconds. The Bluetooth icon
flashing as the microwave starts to search and pair with
your Café range. The icon
successfully.
If a Café range is not found within 2 minutes during
search mode the microwave will stop searching and the
Bluetooth icon
will turn OFF.
On initial setup, the setup protocol will start.
If the Chef Connect feature is enabled the default set-
tings are as follows:
- Display clock sync: ON
- Auto cooktop light: ON (HIGH setting)
- Auto vent fan: OFF
- Auto off: 15 minutes
3. Select 3 to sync the surface lights to your Café range. It
allows the microwave surface lights to turn on at HIGH/
LOW level automatically when the paired range's cook-
top burner turns on.
Accessories
Looking For Something More?
Café offers a variety of accessories to improve your cooking and maintenance experiences!
place an order visit us online at: cafeappliances.com/parts
The following products and more are available at extra cost
from your Café Appliances supplier.
36" Width Filler Kits
When replacing a 36" range hood, filler panel kits fill in the
additional width to provide a custom built-in appearance.
For installation between cabinets only; not for end-of
cabinet installation. Each kit contains two 3" wide filler
panels.
15" Cabinet Installation Kit
For use with cabinets deeper than 12 inches. Brings
microwave further out from the wall for improved
49-7000066 Rev. 0
on the display will start
will remain ON after pairing
4. Select 4 to sync the vent fan to your Café range. This
allows the microwave vent fan to turn on at LOW/MID-
IUM/HIGH/BOOST speed automatically when the paired
range's cooktop burner turns on.
Pairing is now complete, the Chef Connect feature is
now on.
NOTE: If there is no sync option selected during set up,
5 minutes after icon
stand-by mode.
After completing the setting per above steps, your mi-
crowaves vent fan and cooktop light will be set to turn
on automatically when the cooktop burner is turned on.
The cooktop and range clock display will be synced to
display the same time. The vent fan and cooktop light
will be set to automatically turn off 15 minutes after the
cooktop burner is turned off.
If desired, the light, fan, and auto off settings can now be
changed using settings options 3, 4, and 5, respectively.
Press Chef Connect once to turn off and twice to re-con-
nect. The icon
will illuminate when on.
In the case of an unintended disconnect such as lost
power to the microwave or range the connection will
remain after power resumed. For very short power in-
terruptions, the power may need to be reset in order to
reconnect
Connect
Hold 3 Sec
ventilation, access, and appearance.
Charcoal Filter Kits
Filter kits are used when the oven cannot be vented to the
outside. Please check online in your full Owner's Manual
for filter installation Instructions. Replace your filters every
6 months.
Cooktop Lights/Nite Lights
Oven Cavity Lamp
turns on, the units will return to
Chef
To
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TC051K6CA-S GE and is the answer not in the manual?

Questions and answers

Table of Contents