Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 21kgs. Please lift space to layout the parts before recommend the with care.
Page 3
If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side Bookcase End (D0094B) (D0095B) (D0097B) (706 x 353mm) (706 x 353mm) (706 x 186mm) Shelf...
Page 4
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5
If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare drawer fronts and wraps x 3 Screw 2 x metal dowels into the holes shown on the back of the drawer front Note: Tighten metal dowels up fully against...
Page 6
Assembly Instructions Step 3 Attach drawer stops Carefully break off the 2 drawer stops (F599) from each pair of the drawer runners Push the drawer stops fully through the drawer wraps from the inside. F599 F599 F599 F599 Step 4 Attach the handles Attach a handle each drawer front using...
Page 7
Assembly Instructions Step 5 Prepare left and right side F600 10mm Separate runners Push fit 3 left runners marked ‘L’ into the holes shown on left side Note: Runners must be be fitted flat against the Finished panel. If necessary front edge gently tap into final position.
Page 8
Assembly Instructions Step 6 Prepare plinth and rail Main unit colour Tap 2 wooden dowels into the ends of both the plinth and rail Note: The plinth will (349 x 92mm) (349 x 80mm) be finished with the main unit colour on one surface.
Page 9
Assembly Instructions Step 9 Fit left side Attach the left side the plinth and rail using 2 x screws Step 10 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit back panel Square up the unit by making sure that...
Page 10
Assembly Instructions Step 11 Prepare the 2 bookcase ends Insert 2 large locking nuts into each bookcase end Tap a wooden dowel inside into the end of each surface bookcase end inside surface inside surface Step 12 Fit shelves Finished surface Attach 3 shelves the bookcase ends...
Page 11
Assembly Instructions Step 13 Choose desk layout Before going onto the next step, decide which way around you would like your desk to be. Place the 2 assemblies where the desk will be used, so that the unit Drawers on the left does not have to be moved once the top panel has been secured...
Page 12
Lift with care. Assembly is complete If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW ALR2448...
Need help?
Do you have a question about the Malibu 617/1225 and is the answer not in the manual?
Questions and answers