Sleep Mode; Trouble Shooting - rollease acmeda Automate MT01-1325-069001 Programming Instructions Manual

14

SLEEP MODE

9 SLEEP MODE
If multiple motors are grouped on a single channel, Sleep Mode may be used to put all but 1 motor to sleep,
allowing programming of just the one motor that remains "Awake". See page 6 for detailed P1 functions.
Enter Sleep Mode
Sleep mode is utilized to
prevent a motor from incorrect
configuration during other
motor setup.
Hold P1 button on the motor
head
Motor Response
Approx.
15

TROUBLE SHOOTING

Problem
Motor is not responding
Motor beeps x10 when in use
Cannot program a single motor
(multiple motors respond)
ROLLEASE ACMEDA | USA
Level 7 / 750 East Main Street
Stamford, CT 06902, USA
T +1 800 552 5100 | F +1 203 964 0513
16 | Automate Programming Instructions | Li-ion Tubular Motors
™
Exit Sleep Mode: Method 1
Exit sleep mode once the shade
is ready.
Press and release P1 button on
the motor head
Motor Response
G
Cause
Battery in motor is depleted
Insufficient charging from solar
PV panel
Transmitter battery is discharged
Battery is inserted incorrectly
into transmitter
Radio interference/shielding
Receiver distance is too far from
transmitter
Charging failure
Battery voltage is low
Multiple motors are paired to the
same channel
ROLLEASE ACMEDA | AUSTRALIA
110 Northcorp Boulevard,
Broadmeadows VIC 3047, AUS
T +61 3 9355 0100 | F +61 3 9355 0110
Exit Sleep Mode: Method 2
Remove power and then
re-power the motor.
rolleaseacmeda.com
Remedy
Recharge with a compatible
charger
Check connection and orientation
of PV panel
Replace battery
Check battery polarity
Ensure transmitter is positioned
away from metal objects and
the aerial on motor or receiver
is kept straight and away from
metal
Move transmitter to a closer
position
Check power supply to motor is
connected and active
Recharge with a compatible
charger
Always reserve an individual
channel for programming
functions. Use Sleep Mode to
program individual motors.
ROLLEASE ACMEDA | EUROPE
Via Conca Del Naviglio 18,
Milan (Lombardia) Italy
T +39 02 8982 7317 | F +39 02 8982 7317
ROLLEASE ACMEDA