KitchenAid 5KICA0WH Manual page 9

USING THE ICE CREAM MAKER ATTACHMENT
Position the drive assembly onto the
mixer so that side B is closest to the
3
beater shaft. Slide drive assembly
onto the motor head until it will not
slide any further.
Raise the bowl to engage the dasher
with the drive assembly before
mixing. If the drive assembly doesn't
5
engage the dasher, slide the drive
assembly either back or forward until
it does engage the dasher properly.
Plug the Stand Mixer into an
6
earthed outlet.
12 | USING THE ICE CREAM MAKER ATTACHMENT
When properly assembled, the outer
curved edges of the drive assembly
should centre on the motor head. If
they are not centred, slide the drive
4
assembly either back or forward until
it is centred on the motor head. Make
sure the drive assembly is securely in
place by pressing upward.
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.