Profinet Io Object (F6H) - HMS Anybus CompactCom 30 Design Manual

Network Specific — PROFINET
13.2

PROFINET IO Object (F6h)

Attribute
#1, Device
ID
#3, Station
Type
#8, I&M Or-
der ID
#19, System
Description
®
Migrating from Anybus CompactCom
Default Anybus CompactCom Product
0007h 30-series, PROFINET IO 1-Port
0009h 30-series, PROFINET IO 2-Port
0010h 40-series, PROFINET IRT
"ABCC-PRT" 30-series, PROFINET IO 1-Port
"ABCC-PRT 30-series, PROFINET IO 2-Port
(2-Port)"
"ABCC40- 40-series, PROFINET IRT
PIR"
"ABCC-PRT" 30-series, PROFINET IO 1-Port
"ABCC-PRT 30-series, PROFINET IO 2-Port
(2-Port)"
"ABCC40- 40-series, PROFINET IRT
PIR"
"HMS Indus- 30-series, PROFINET IO 1-Port
trial Net-
works Any-
bus Com-
pactCom"
"Anybus 30-series, PROFINET IO 2-Port
Compact-
Com PROFI-
NET IO 2-
Port"
"HMS Indus- 40-series, PROFINET IRT
trial Net-
works Any-
bus-Com-
pactCom 40"
®
™ 30 to Anybus CompactCom
Comment
The Device ID controls how your
product identifies itself on the PROFI-
NET network.
If the attribute is implemented in the
host application, it overrides the de-
fault value and there is no difference
between the 30-series and the 40-
series.
If the attribute is not implemented,
the default value differs between the
different CompactCom PROFINET
types.
The Station Type defines the name
your product uses to identify itself on
the PROFINET network.
If the attribute is implemented in the
host application, it overrides the de-
fault value and there is no difference
between the 30-series and the 40-
series.
If the attribute is not implemented,
the default value differs between the
different CompactCom PROFINET
types.
If the attribute is implemented in the
host application, it overrides the de-
fault value and there is no difference
between the 30-series and the 40-
series.
If the attribute is not implemented,
the default value differs between the
different Anybus CompactCom PRO-
FINET types.
If the attribute is implemented in the
host application, it overrides the de-
fault value and there is no difference
between the 30-series and the 40-
series.
If the attribute is not implemented,
the default value differs between the
different Anybus CompactCom PRO-
FINET types.
™ 40 Design Guide
28 (38)
SCM-1202-043 1.1