Related Manuals for Bissell QUICKSTEAMER 1950
Summary of Contents for Bissell QUICKSTEAMER 1950
- Page 1 QuickSteamer ™ U S E R ’ S G U I D E 1950 SERIES Safety Instructions Product view Assembly Operations / Special Tools Routine Maintenance Troubleshooting Consumer Services Replacement Parts Warranty...
- Page 2 My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your QuickSteamer. Thanks again, from all of us at BISSELL.
-
Page 3: Important Safety Instructions Warning
User’s Guide. Use only manufacturer’s recommended attachments. Use only cleaning products formulated by BISSELL for use in this appliance. Keep openings free of dust, lint, hair, etc. Keep appliance on a level surface. Turn off all controls before unplugging. -
Page 4: Product View
Quick Release Spray Cord Wrap Trigger Power Cord Power Switch Clean Water Tank Large, Easy Rolling Wheels Phillips Head Screw Lower Lower Body Cord Wrap Detent Lever Handle Assembly Vent Cover Containing Foam Filter Dirty Water Tank Floor Nozzle Spray Bar... -
Page 5: How To Put It Together
Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL QuickSteamer for many years. Your QuickSteamer comes in two, easy to assemble components. Detachable Handle... -
Page 6: How To Begin
How to use your BISSELL QuickSteamer How to begin Plan activities to give carpet time to dry. Remove easily moved furniture (chairs, lamps, coffee/cocktail tables, etc.) from room if needed. Vacuum carpet thoroughly. Decide where to begin — and end — your job. Clean in 3’... -
Page 7: Pre-Treating
Refill if needed. Attaching the Bare Floor Tool *Available with select models only. If your QuickSteamer did not come so equipped, you may call BISSELL Consumer Services at 1-800-237-7691 to order one. You can also visit the BIS- SELL website: www.bissell.com. -
Page 8: Cleaning Bare Floors
Bare Floor Tool snap over front lip of Floor Nozzle. Replace empty Dirty Water Tank. Empty and rinse Clean Water Tank. Using the Formula Measuring Cap, add two (2) capfuls of BISSELL ® Floor Cleansing Formula ™ to the Clean Water Tank. -
Page 9: After Using
When you’re done Turn Power Switch to OFF ( ) position. Unplug Power Cord from outlet. Remove and empty Dirty Water Tank. a. Press detent Pedal and tip Handle back, laying it gently on floor. b. Release Dirty Water Tank latches [1 each side] by pulling up from bottom of latch and then out. -
Page 10: Troubleshooting
Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. -
Page 11: Replacement Parts
Replacement parts - BISSELL QuickSteamer Item Part No. Part Name 603-7818 Handle Assembly 603-7821 Cross Action Brush 603-7822 Bare Floor Tool 407-0931 Clean Water Tank 603-7815 Dirty Waster Tank (Blue) 603-7816 Dirty Water Tank (Teal) 603-7814 Formula Measuring Cap 32 oz.BISSELL Cleansing Formula 32 oz.BISSELL... -
Page 12: About Your Warranty
User's Guide is not covered. If your BISSELL product should require service: Call BISSELL Consumer Services at the number below or visit the BISSELL website - www.bissell.com to locate a BISSELL Authorized Service Center in your area. If there are no authorized BISSELL Service Centers in your area, select the "Customer...
Need help?
Do you have a question about the QUICKSTEAMER 1950 and is the answer not in the manual?
Questions and answers
Can the Quickstmr be used on bare (uncarpeted) floors?
The Bissell QuickSteamer 1950 can be used on bare floors only if it is equipped with the Bare Floor Tool, which is available with select models. It is not recommended for cleaning wood floors and should only be used with BISSELL® Floor Cleansing Formula™ on no-wax floors.
This answer is automatically generated
@J Not worried about floor damage. Only concerned with cleaning effectiveness.
I have cleaned out any clogs annd the bar and I still don’t get a spray.
If your Bissell QuickSteamer 1950 is not spraying water even after cleaning out clogs, possible causes include:
1. The Dirty Water Tank may not be properly aligned or secured. Check that it is correctly positioned and latched.
2. The Dirty Water Tank may be full. If it is full, empty it.
3. The Clean Water Tank may be empty. Refill it with water and formula.
Check each of these areas to ensure proper operation.
This answer is automatically generated
If the water tank only has a little water in it (less than 1/2 tank), does that effect the spray?
Yes, if the Clean Water Tank is empty or has too little water, it can cause reduced spray or no spray from the Bissell QuickSteamer 1950. Refill the tank with water and formula to restore proper spray function.
This answer is automatically generated