Getting Started; Installing The Base - Motorola AXH01 Quick Start Manual

2.

Getting started

In order to set-up the Motorola AX device to work with Alexa, landline and
Alexa-to-Alexa (A2A) calling, you need the following:
1. An active landline home telephone service.
2. An active Caller Display subscription.
3. An active internet network and Wi-Fi router.
4. An Amazon account.
5. The Amazon Alexa app.
6. The Motorola hellovoice app.
2.1

Installing the base

Plug the Ethernet
1
cable into the
socket on the rear
of the base and
plug the other end
into any spare
Ethernet port on
the router.
Note
The base station must be connected to the AC power outlet and the
Ethernet cable must be plugged into the router at all times. Use only the
AC power adaptor and telephone line cord supplied with the product.
Motorola AXH01 EN US QSG.indd 3
2
3 The telephone line cord will be
pre-installed into the socket on the
rear of the base.
It is recommended to complete set-up
(refer to Section 8.1) before you plug
the other end of the telephone line
cord into the telephone line wall jack.
3
Plug the AC power
jack into the socket on
the rear of the base
and the AC power
adaptor into the
power outlet.
28/04/2019 21:51