HSGM Styro-Cut 230 Data Sheet / Manual

HSGM
STYROFOAM-CUTTERS
Datasheet / Manual
Type HSGM Styro-Cut 230
The powerful performance professional tool for the Building Trade
With electronic power control,
for an optimal adjustment of the blade temperature.
For board thicknesses up to 230mm (9.1") and for specialty cuts.
Technical Description:
Heats up in only 10 seconds
Supply voltage: 230V-50 Hz
Power input: max. 230 Watt
Optimal level of efficiency
LED-power indicator
Protective insulation
Mains cord 3m
Blade temperature 500°C (930°F) max.
Eliminates styrofoam dust
Low Weight: 0,6 kg, 1,5 kg incl. plastic case
Practicable blades:
Type DSS-200
For boards
up to 180 mm (7.1'')
Type DSS-220
For boards
up to 200 mm (7.9'')
Type DSS-250
For boards
up to 230 mm (9.1'')
Type C-100
For boards
up to 100 mm (4'')
Type C-140
For boards
up to 140 mm (5.5'')
Type C-160
For boards
up to 160 mm (6.3'')
Type C-180
For boards
up to 180 mm (7.1'')
Type C-200
For boards
up to 200 mm (7.9'')
Type C-230
For boards
up to 230 mm (9.1'')
Profile-Section-Adapter type P-A, to cut individual grooves into styrofoam.
Up to a groove width of 120 mm.
Picture shows tool HSGM Styro-Cut 230 with Profile-Section-Adapter type P-A.
HSGM GmbH
In der Rehbach 13
D-65396 Walluf
Basic Kit:
1 HSGM STYRO-CUT 230
2 Blades (1x DSS-220 for boards up to 200 mm
and 1x DSS-250 for boards up to 230mm)
1 Brass brush
1 Screwdriver
Type CN-14, curved
For 14 mm grooves
Type CN-20 curved
For 20 mm grooves
Type CN-26 curved
For 26 mm grooves
Type CR-20 curved
For 20 mm grooves
With depth guide
Type CS-20 curved
For 20 mm grooves
With depth guide
Connector socket cutter
Typ D68-61
For cutting holes Ø 68 mm
Telefon: +49 (0) 6123 9978-0
Telefax: +49 (0) 6123 9978-40
E-Mail: info@hsgm.com
http://www.hsgm.com