Kenwood KCH-16 Service Manual page 12

KCH-16
Keypad input mode
Item
Key
[S]
[A]
[B]
[C]
[Orange]
[ ]/[ ]
[ ]
[ ]
Keypad ([0] to [9])
Keypad ([ ])
Keypad ([ ])
PTT
● Self programming mode fl ow chart
[A]
[TX Frequency] : "OFF"
[Channel Type] : "ANALOG"
[A]
[Channel Type] : "ANALOG"
[A]
[TX Frequency] : "OFF"
Talkgroup ID List Amount : 0
or
[TX Frequency] : Other than "OFF"
[Channel Type] : "MIXED"
[TX Mode] : "ANALOG"
Talkgroup ID List Amount : 0
[A]
Talkgroup ID List Amount : 0
12
REALIGNMENT
RX Frequency
Cancel the keypad input mode (Return to the normal mode)
Cancel the keypad input mode (Return to the normal mode)
Delete the least digit from the current number (Press and hold to delete all numbers.)
Unused
Add a digit to the current number (Return to the normal mode automatically if all digit are entered.)
Cancel the keypad input mode (Return to the normal mode)
Delete the least digit from the current number (Press and hold to delete all numbers.)
[ ] + Power ON
Input Password
Self programming mode
Zone/Channel
RX Frequency
TX Frequency
Channel Type
[A]
[TX Frequency] : "OFF"
or
[Channel Type] : "ANALOG" or "P25"
TX Mode
Channel Spacing
[A]
[Channel Type] : "P25"
RX Signaling
[A]
[TX Frequency] : "OFF"
[Channel Type] : "P25" or "MIXED"
or
[TX Frequency] : Other than "OFF"
[Channel Type] : "MIXED"
[TX Mode] : "P25"
TX Signaling
[A]
[TX Frequency] : "OFF"
Talkgroup ID List Amount must not be 0.
or
[TX Frequency] : Other than "OFF"
[Channel Type] : "MIXED"
[TX Mode] : "ANALOG"
Talkgroup ID List Amount must not be 0.
Talkgroup List No.
TX Frequency
ON/OFF switching
Unused
Unused
Unused
Unused
Unused
Read authorization password entry (6 digits)
[A]
[A]
Zone selection
[A] When the [C] key is pressed,
new data is written into memory.
[A]
[C]
OFF
[A]
[A]
[TX Frequency] : Other than "OFF"
[Channel Type] : "MIXED"
[A]
[A]
[Channel Type] :
"ANALOG" or "MIXED"
OFF
[A]
[TX Frequency] : Other than "OFF"
[Channel Type] : "ANALOG" or "MIXED"
[TX Mode] : "ANALOG"
OFF
[A]
[Channel Type] : "MIXED"
RX NAC
[A]
[TX Frequency] : Other than "OFF"
[Channel Type] : "P25" or "MIXED"
If [Channel Type] is set to "MIXED",
[TX Mode] must be set to "P25".
TX NAC
[A]
[Channel Type] : "P25" or "MIXED"
Talkgroup ID List Amount must not be 0.
[A]
RX Signaling TX Signaling
QT/DQT(N)/DQT(I)/OFF switching
[B]
Channel selection
[B]
ANALOG P25
[B]
[B]
ANALOG P25
[B]
*1
25.0kHz
*1 [Channel Type] : "ANALOG" or "MIXED"
[B]
*2
P25 12.5kHz
*2 [Channel Type] : "P25"
QT DQT N
[C] [C]
[C]
QT DQT N
[C] [C]
MIXED
[B]
12.5kHz
12.5kHz
[C]
DQT I
[C]
DQT I
[C]