Download Print this page
WiMo miniVNA PRO2 Hardware Manual

WiMo miniVNA PRO2 Hardware Manual

Advertisement

Quick Links

Hardware Guide for miniVNA PRO2
Congratulation ....
on your choice of miniRadioSolutions analyzer.
This is the hardware reference manual.
Safety
Please carefully read the safety instruction included in this manual.
The Software for miniVNA PRO2 is continuously developed. The current software is always downloadable from the internet.
For the latest software and updates, visit
The new miniVNA PRO2 is an extraordinary and unique hand-held vector network analyzer that makes available a multitude of new
features and capabilities which are perfect for checking antennas and RF circuits for hams and commercial users. Together with your
PC/Laptop, you can add to your laboratory the further advantages of having this first-class VNA instrument.
This is the first world's wireless analyzer able of scanning and sending the data using an integrated Blue-tooth module to a remote
PC/Notebook up to 100 meters from the miniVNA PRO2's location. This makes real-time antenna set-up easy!
Basic Carton Content
+49 7276 / 96680
www.miniradiosolutions.com and http://vnaj.dl2sba.com/

Specifications

Frequency range 0.01-230 MHz
Calibration using open-short-load for accurate results
Range of Z from 1 to 1000 ohm
Two ports VNA with S11 and S21; displayed and save results
I/Q DDS Generator with output power of 0 dBm
Two separate RF output I/Q for SDR experiment and IMD test with
independent 0-55 dB attenuator; Phase adjustment resolution of 1 degree
Built in Blue-tooth Class 1 for remote measurements
Internal Battery Li-ion with 1000 mA/h (4 hours full- scan operation)
Built-in battery charger (up to 400 mA)
Accessory port for future optional interfaces and frequency extenders
Low power consumption, 220 mA @ 3.7 V (analyzer mode using USB
port)
Power-saver mode
SMA connectors for better isolation
Extended dynamic range – up to 100dB in Transmission & 50 dB in
Reflection
Boot loader for future firmware upgrades
User friendly interface for PC Windows, Linux and Mac
Integrated Smith chart in software
Optional extender for UHF and SHF band (under development)
Mobile Phone software (under development)
Measurements of motional crystal parameters, cable length, & more
Export data in several formats – JPEG, EXCEL, ZPLOT, S2P, PDF
www.wimo.com
info@wimo.com
Hardware Guide
............
..........
.............
 WiMo 2018
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the miniVNA PRO2 and is the answer not in the manual?

Questions and answers

Summary of Contents for WiMo miniVNA PRO2

  • Page 1: Specifications

    The new miniVNA PRO2 is an extraordinary and unique hand-held vector network analyzer that makes available a multitude of new features and capabilities which are perfect for checking antennas and RF circuits for hams and commercial users. Together with your PC/Laptop, you can add to your laboratory the further advantages of having this first-class VNA instrument.
  • Page 2 Hardware Guide for miniVNA PRO2 Caution Safety Instructions – which must be strictly observed Hazardous Environments Do not operate the analyzer in hazardous environments. This equipment is intended to be used for maintenance, research, evaluation, simulation and other analytical or scientific applications in areas such as industrial plants, public utilities, hospitals, universities, laboratories, automotive service centers and electronic repair shops.
  • Page 3 Hardware Guide for miniVNA PRO2 Connection from - RF side • DUT Port is typically connected to the antenna under test when the analyzer is set by the software interface to work in Reflection mode. ! Caution Not apply to this port DC signals over 25 VDC and RF signals over 10 mW.
  • Page 4 Hardware Guide for miniVNA PRO2 LED placement and meaning. LED 1 / yellow Indicates battery in charge LED 2 / green LED 1 Indicates scan data LED 2 LED 3 / green Indicates power on LED 3 LED 4 / yellow LED 4 Indicates flow of data.