Advertisement
Table of Contents
What's In This User Guide?
Safety Advice -
All users should read this
Repacking Cases -
How to use the machine
Best Practises -
Simple steps to get the best result
Troubleshooting -
What to do should you need help
©Total Disc Repair Ltd | www.totaldiscrepair.co.uk | Technical Support: 0800 412 5424 - support@totaldiscrepair.co.uk | Sales: 01202 489 500 - sales@totaldiscrepair.co.uk
Getting Started
Safety advice
Thank you for choosing the Repack-it overwrapper machine,
please read the safety advice before fi rst use and be sure to
inform any other users of this safety information.
Do not touch the heater element, or surrounding area
before, during, or after using the machine.
Do not use the Repack-It near fl ammable objects or substances.
Always plug the power cable into a grounded power socket.
If you see or smell smoke coming from the Repack-it, unplug
it immediately from the socket and contact Technical Support.
Do not attempt to repair the machine without the help of the
Technical Service.
Never bend the power cable.
Do not open or modify the machine – this can cause damage
and will void your warranty.
Always call Technical Support straight away if you need advice
or the machine isn't operating correctly.
0800 412 5424
Technical Support Line:
- Monday-Friday, 9am-5pm.
Advertisement
Table of Contents
Summary of Contents for TDR Repack-it
- Page 1 Do not touch the heater element, or surrounding area before, during, or after using the machine. Do not use the Repack-It near fl ammable objects or substances. Always plug the power cable into a grounded power socket. If you see or smell smoke coming from the Repack-it, unplug it immediately from the socket and contact Technical Support.
-
Page 2: Getting Started
Doing so is dangerous and will void the warranty. 3. Leave room around the sides of the machine for ventilation. Starter pack of 50 Starter pack of 50 Repack-It Machine Power cable Standard/DVD sheets Parts of the machine... -
Page 3: Operation
This machine uses a range of different sized cellophane sheets, designed to fi t the common disc format cases: Switch on the Repack-it and wait a few seconds until it reaches the operative temperature of around 160-165° C. If the temperature display reads higher than 176°... - Page 4 Operation - cont.. Seal the cellophane by touching it against the heat plate for just a second. Seal this side of the case, too, again moving it left and right. Be careful not to touch the heater or the surrounding area. In a smooth continuous action, swipe the box left and right to seal the sheet along the whole length of the case.
-
Page 5: Troubleshooting
If the problem persists, please contact Technical Support. Important Do not use the Repack-it if the temperature is higher than 176° C. Just wait a few seconds until the temperature drops. Of course, any problem at all you should call Technical Support straight away on 0800 412 5424.
Need help?
Do you have a question about the Repack-it and is the answer not in the manual?
Questions and answers