Additional Operations - Sony 3-299-549-11(1) Operating Instructions Manual

Sony dvd home theatre system operating instructions
Table of Contents

Advertisement

To save the power in standby mode
Press "/1 while the system turns on, then the system enters standby mode. To cancel standby mode,
press "/1 once.
To enter power standby mode, make sure that the system is in the following status.
– [CONTROL FOR HDMI] is set to [OFF] (page 71).
– "S-AIR STBY" is set to "OFF" (page 76).
Note
• When the system is turned off, do not push a disc into the control unit.

Additional operations

To
Stop
Pause
Resume play after pause
Go to the next chapter, track, or scene
Go back to the preceding chapter, track,
1)
or scene
Turn off the sound temporarily
Stop play and remove the desired disc Z
Locate a point quickly by playing a
disc in fast forward or fast reverse
1)2)
(Scan)
Watch frame by frame (Slow-motion
3)
Play)
Play one frame at a time (Freeze
3)5)
Frame)
Replay the previous scene
6)
(10 seconds before)
Briefly fast forward the current scene
7)
(30 seconds after)
1)
Except for JPEG image files.
2)
Scan speeds may differ with some discs.
3)
DVD VIDEO, DVD-R, DVD-RW, VIDEO CD only.
4)
Except for VIDEO CDs.
5)
For a DATA CD/DATA DVD, this function works only for DivX video files.
6)
DVD VIDEO/DVD-RW/DVD-R only. The button can be used except for DivX video files.
7)
DVD VIDEO/DVD-RW/DVD-R/DVD+RW/DVD+R only. The button can be used except for DivX video files.
Note
• You may not be able to use the instant replay or instant advance function with some scenes.
40
GB
Press
x
X
X / H on the remote or N (soft-touch button) on the control unit.
1)
>
. twice in a second. When you press . once, you can go to the
beginning of the current chapter, track or scene.
MUTING. To cancel muting, press it again or VOLUME + to adjust the
sound volume.
or
/m while playing a disc. Each time you press M/
M/
or
/m during scanning, the playback speed changes. To return to
normal speed, press H. Actual speeds may differ with some discs.
4)
or
/m
while the system is in pause mode. Each time you
M/
press M/
or
/m
speed changes. Two speeds are available. To return to normal playback
speed, press H.
to go to the next frame while the system is in pause mode. Press
to go to the preceding frame while the system is in pause mode (DVD
VIDEO/DVD-VR/DVD-R/DVD-RW/DVD+R/DVD+RW only).
To return to normal playback, press H.
(instant replay) during playback.
(instant advance) during playback.
4)
during Slow-motion Play, the playback

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dav-is503-299-549-12(1)

Table of Contents