Siemens SINAMICS G110M Function Manual page 38

Communication via PROFIBUS and PROFINET
3.1 PROFIDRIVE profile - Cyclic communication
Table 3- 4
AK
0
1
2
3
4
5
6
7
8
The required element of the parameter is specified in IND (2nd word).
1)
The required element of the indexed parameter is specified in IND (2nd word).
2)
36
Response identifiers, inverter → control
Description
No response
Transfer parameter value (word)
Transfer parameter value (double word)
Transfer descriptive element
Transfer parameter value (field, word)
Transfer parameter value (field, double word)
Transfer number of field elements
Inverter cannot process the request.
In the most significant word of the parameter channel, the inverter sends an error number to
the control, refer to the following table.
No master controller status / no authorization to change parameters of the parameter chan-
nel interface
1)
2)
2)
Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
Fieldbuses