Page 2
1. Unpacking Carton Contents Environmental Information This product complies with international directives, including but not limited to: Check in the carton for: 1 Foam plug i. the Restriction of Hazardous Substances (RoHS) in 4 Self-adhesive rubber supporting feet electrical and electronic equipment, ii.
Page 3
2. Positioning 0.5m – 1m 0.5m – 1m Speaker Installation If using a projector with an acoustically transparent screen, place the speaker behind the centre of the screen. beyond the boundaries of the cabinet. We recommend you keep Otherwise position it directly above or below the screen, magnetically sensitive articles (CRT television and computer whichever is closest to ear level.
Page 4
3. Connections All connections should be made with the audio equipment Ensure that the positive terminals on the speaker (marked + and switched off. coloured red) are connected to the positive output terminal on the There are 2 linked pairs of terminals on the back of the speaker. coloured black) are connected to the negative output terminal on For conventional connection (above left), the terminal links should remain in place (as delivered) and just one pair of...
Page 5
4. Fine Tuning If the bass seems uneven with frequency this will most probably installation are correct and secure. be a consequence of the acoustic properties of your listening room. Even small changes in the position of the speakers Moving the speakers further from the walls will generally reduce the volume of bass.
Page 6
5. Running In 6. Aftercare The performance of the speaker will change subtly during the The cabinet surfaces will usually only require dusting. If you wish initial listening period. If the speaker has been stored in a cold to use an aerosol or other cleaner, apply the cleaner onto the environment, the damping compounds and suspension materials of the drive units will take some time to recover their correct as some cleaning products may damage some of the surfaces.
Need help?
Do you have a question about the HTM71 S2 and is the answer not in the manual?
Questions and answers