Mitsubishi Electric RD78G4 User Manual page 59

"CC-Link IE TSN/CC-Link IE Field Diagnostics" window
Network map
Item
Select Module
Diagnostics
[Change Module]
Destination
button
Select Station
Monitor [Start Monitoring]
Status button
[Stop Monitoring]
button
[Update] button
[Legend] button
St. Info
Description
The Motion module under diagnostics is displayed.
Allows to change the target Motion module when multiple Motion module are mounted.
Selects the station No. of the station to be diagnosed.
A station to be diagnosed can also be selected by clicking the module icon displayed in the network map.
Starts monitoring the CC-Link IE TSN/CC-Link IE Field diagnostics.
Stops monitoring the CC-Link IE TSN/CC-Link IE Field diagnostics.
If the actual network configuration and network map of the "CC-Link IE TSN/CC-Link IE Field Diagnostics" window are
inconsistent, the network map update is executed so they are matched. A data link error may momentarily occur in all
the stations and outputs of the connected slave stations may turn off since all stations on the network will be
reconnected when executing the network map update. Set output data if needed.
Displays the meaning of icons displayed in the "CC-Link IE TSN/CC-Link IE Field Diagnostics" window.
The display name of the slave station can be selected from "By Device Name", "By Station Type", "By Model Name", or
"By IP Address".
"By Device Name" displays the information entered in "Alias" of "Network Configuration Settings" under "Basic
Settings". The station type is displayed when the "Alias" is not entered.
Disconnected station
status monitor
3 TROUBLESHOOTING
3.3 Checking the Network Status
3
57