Using The Tv/Video Screen - Sony LF-X1, LF-X5 Operating Instructions Manual

Using the TV/Video
Screen
Parts and controls on the TV/Video screen
A TV/Video mode indicator
B TV channel number
C SAP (Secondary Audio Program) mode
indicator (1 page 68)
Displays [STEREO] or [SAP] each time the
[SAP] button is pressed.
◆For the LF-X1
The channel number input by the infrared
remote control is shown here.
◆For the LF-X5
The wide mode selection ([Wide Zoom],
[Normal], [Full], and [Zoom]) is shown.
D Volume level indicator
E On-screen remote control
Appears when you touch anywhere on the
TV screen and allows you to select a
channel. Different remote controls appear
depending on the settings.
Note
This monitor does not support non-interlace signals
used for computer monitors, etc.

Using the TV/Video Screen

F SAP button (1 page 68)
Switches between STEREO and SAP when
an SAP program is tuned in.
G Wide button (LF-X5 only) (1 page 71)
Switches to Wide Screen mode.
Select repeatedly to cycle through the Wide
Screen mode settings: Wide Zoom, Normal,
Full, Zoom.
H Rate button
Optimizes picture quality according to the
ambient radio wave conditions.
I [GetAV] appears here when
on the upper portion of the screen (only
appears when another bound monitor is
connected to the base station using NetAV.).
J Settings button
Displays the [Settings] window.
appears
67