Pioneer PDP-503CMX Product Training Manual page 60

Menu Mode
Settings for peripheral equipment
In accrodance with input signal frequency, this unit automatically identifies pesonal computer signals and video
signals from DVD players and the like. Although it is equipped with function for identifying the resolution of personal
computer signals, the automatic signal identification function will not operate for the following signal input: a) 31.5kHz
horizontal/60Hz vertical and b) 48.4kHz horizontal/60Hz vertical or 56.5kHz horizontal/70Hz vertical. In such cases,
settings must be made manually.
Make all settings for INPUT 1, 2 and 5 in accordance with the following.
Example:
When connecting an AV device
When connecting a personal computer= select VGA, WIDE VGA, XGA or WIDE XGA in accordance with resolution.
Set-able condition
Factory preset
1 Select SET UP.
Screen 1
MAIN MENU
PICTURE SET UP
I N P UT
AUT O P O WER
D I G I T A L NR
H I GH C O T
P URE C I N MA
C L AM P
S E T T I N
V I DE O S I GNA L
SELECT
60
= select SETTING: VIDEO.
: INPUT 1, 2 and 5
a) For 31.5kHz horizonal and 60Hz vertical signal input
b) For 48.4kHz horizontal and 60Hz vetical or 56.5kHz horizontal and 70Hz vertical signal input
: VGA, for "a"
XGA, for "b"
INPUT1
OPTION
:
L A B E L I N P UT 1
: OF F
OF F
: L OW
: O F F
N R A T S
: O F F
E
: A U T O
P S I T I O N O
G : V I D E O
: R G B
ENTER EXIT
SET MENU
2 Select SETTING and use the <2 / 3> button to
change the setting.
Each time the <2 / 3> button is pressed,
settings will change as follows.
a) 31.5kHz horizontal/60Hz vertical signal input
For INPUT 1 or INPUT 2:
VIDEO VGA
WIDE VGA
For INPUT 5:
VGA WIDE VGA
b) 48.4kHz horizontal/60Hz vertical or
56.5kHz horizontal/70Hz vertical input signal
XGA WIDE XGA
Screen 2
S E T T I N G : V G A
SELECT
SET
SET EXIT
MENU