Installing The Es3000 V3 Driver In Esxi - Huawei ES3000 V3 User Manual

ES3000 V3 NVMe PCIe SSD
User Guide
----End

3.6.3 Installing the ES3000 V3 Driver in ESXi

Operation Scenario
You need to install the ES3000 V3 driver on the server before using the ES3000 V3 for the
first time.
Preparations
Before installing the ES3000 V3 driver, check that:
l
l
l
Procedure
Step 1 Log in to the OS as an administrator or a member of the administrator group.
Step 2 Install the ES3000 V3 driver.
The following procedure assumes that the driver package is in the /tmp directory, and the
driver package name is hiodriver-3.3.5.2-1OEM.550.0.0.2768847.x86_64.vib.
Run the following command to install the ES3000 V3 driver package:
esxcli software vib install -v driver package in a directory
The following is an example command:
esxcli software vib install -v /tmp/hiodriver-3.3.5.2-1OEM.550.0.0.2768847.x86_64.vib
Issue 20 (2019-02-27)
– If yes, the driver has been successfully installed.
– If no, contact Huawei technical
Figure 3-19 Expanding Disk drives
NOTE
l If you install multiple ES3000 V3s on a server, you need to install the driver only once.
l To install ESXi on the ES3000 V3, see
You have correctly installed the ES3000 V3 on the server.
You have downloaded the ES3000 V3 driver package to the server, and verified the
package integrity.
You have uploaded the driver package to the server by using WinSCP or other software.
Copyright © Huawei Technologies Co., Ltd.
3 Installation and Configuration
support.
F Installing an OS on the ES3000 V3.
42