1. Manuals
  2. Brands
  3. Titan LED Manuals
  4. Outdoor Light
  5. Wall Pack
  6. Installation manual

Titan LED Wall Pack Installation Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

Congratulations and Thank You for your purchase of Titan LED's Wall Pack Lighting Fixture. Please take a
moment to read this guide and familiarize yourself with this incredible product. Please Observe All Safety
CAUTION: DISCONNECT ALL A/C POWER BEFORE ANY
NOTICE: PLEASE ADHERE TO ALL WARNINGS BELOW
ATTENTION:
The
Titan LED Wall Pack Lighting Fixture Requires 120-277V A/C wiring of the internal Titan LED
Driver Component inside the fixture.Titan LED Wall packs are intended to be installed on a solid verticle surface utilizing
the proper wall mount or junction box securement hardware.
WARNING:
Risk of Fire or Electric Shock. This Product requires electrical input of 120-277Volts A/C to be supplied
to the included Titan LED Driver Component. The Titan LED Driver will be damaged if connected to A/C current that is
outside of this set range of 120 - 277 Volts of alternating current.
WARNING:
Risk of Fire or Electric Shock. LED Wall Pack installation requires knowledge of lighting fixtures and elec-
trical systems is neccesary. If not qualified, DO NOT ATTEMPT INSTALLATION! Damage to product, wiring, driver and
electrical components may occur if retrofit is not performed by a qualified electrician.
WARNING:
To Avoid Risk of Fire or Electric Shock or Damage. Caution must be exercised and guidelines strictly fol-
lowed when installing any A/C lighting fixture.
WARNING:
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
WARNING
:
Risk of fire or electric shock. Light fixture wiring and electrical parts may be damaged if any drilling for in-
stallation occurs. Please use the universal mounting slots on rear of Wall Pack and avoid any additional drilling of lighting
fixture. Check for enclosed wiring and components.
WARNING:
Do not make or alter any open holes in an enclosure of wiring or electrical components during Wall Pack
installation. Only those open holes indicated in the photographs and/or drawings may be made utilized during Wall Pack
installation.Do not leave any other open holes in an enclosure of wiring or electrical components.
TITAN LED WALL PACK
All Images and Information are Property of Titan LED Inc. 2019 and may Only be used by permission.
LIGHTING FIXTURE INSTALLATION!
850 East Covey Lane, Suite #140 Phoenix AZ 85024 - www.titanledus.com
Titan LED Wall Pack
Installation Guide
Precautions
PROUDLY MADE IN THE
United States of America
PAGE 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wall Pack and is the answer not in the manual?

Questions and answers

Summary of Contents for Titan LED Wall Pack

  • Page 1 Risk of Fire or Electric Shock. This Product requires electrical input of 120-277Volts A/C to be supplied to the included Titan LED Driver Component. The Titan LED Driver will be damaged if connected to A/C current that is outside of this set range of 120 - 277 Volts of alternating current.
  • Page 2 Clear lensed window side. Safely store these two screws they will be needed for reassembly. 3) Open Lighting fixture at the hinge to expose internal components. Using a wood shim to lock the wall pack into this open position makes for a more convenient installation for wiring and maintenance.
  • Page 3 Thank You for Your Business. TITAN LED 850 East Covey Lane, Suite #140 Phoenix, AZ 85024 (623) 552-7065 GE 3 o GE 3 o All Images and Information are Property of Titan LED Inc. 2019 and may Only be used by permission.

Table of Contents