User Id; User Password; Dns1 And Dns2; Main Server Parameters - EBS LX20G Installation And Programming Manual

7.1.2.2.
When using public APN , user ID is mostly not required. For private APN this
parameter shall be obtained from operator (it is impossible to be granted access to
GPRS network without it).
7.1.2.3.
When using public APN , user ID is mostly not required. For private APN this
parameter shall be obtained from operator (it is impossible to be granted access to
GPRS network without it).
Note : Private APN provides for higher system security.
7.1.2.4.
It determines address of main and backup DNS server (Domain Name System).
If IP server address has been entered in form of domain it is required to provide
minimum one DNS address.
7.1.3.
7.1.3.1.
It is address of receiver of monitoring system (OSM.Server) or computer where
"Communication Server" software has been installed , e.g. 89.123.115.8. This
address may be provided in domain name of server, e.g. module.gprs.com. In this
case it is required to provide minimum one address of DNS server.
7.1.3.2.
It determines server port that was selected in server for collection of data from
transmitter.
7.1.3.3.
Programmable
connection with server. In this field you define interval (in seconds) after which next
connection will follow if the previous connection failed.
7.1.3.4.
In this filed you determine how many times device will try to make connection to
server. If connections fail, LX20G after execution of some connection will start
procedure of connection to back up server. This option is active only if we define
parameters of backup server.
LX20G_Manual_en_v2.1

User ID

User password

DNS1 and DNS2

Main Server Parameters

Server IP Address

Server port

Interval between subsequent connection attempts

and equipped with SIM card device will try to make automatic

Number of connection attempts

Page 24 /
69