Advertisement
b Turn the fuel switch to "ON" position, and loosen
the carburetor drain screw to discharge
Petrol inside of carburetor.
c. Take off the spark plug cap, pull the starter grip
three or four times, discharge the Petrol from the
fuel lines.
d. Turn the fuel switch to
position, and tighten
"OFF"
the drain screw of carburetor.
e. Reinstall the spark plug cap.
STARTER GRIP
9.3) Change new oil while engine is still warm
from operation.
9.4) Remove the spark plug, and pour a
tablespoon of clean engine oil(10~20ml)into
the cylinder. Revolve the engine several
times to distribute the oil,and reinstall the
spark plug.
9.5) Pull the starter grip slowly until you feel
resistance. At this point, the piston is coming
up on its compression stroke and both the
intake and exhaust valves are closed. In this
position, it helps to protect the engine from
internal corrosion.
<<28>>
Advertisement
