Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Yale Real Living YRD220
Summary of Contents for Yale Real Living YRD220
- Page 1 Yale Real Living Touchscreen Deadbolt ® Installation and Programming Instructions ® (YRD220) Optional Network Module #8-32 x 5/16" Machine screws #7 wood & #8-32 machine x 20mm Combination screws M6x47mm Long through bolt AYRD -220- INST FUL Rev F...
- Page 2 Preparing Door AYRD -220- INST FUL Rev F...
- Page 3 Installing Latch & Strike Plate 2-3/8" position d faut 2-3/4" position optional Pull Press Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. AYRD -220- INST FUL Rev F...
- Page 4 Installing Touchscreen Escutcheon Inside of Door Outside of Door Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. AYRD -220- INST FUL Rev F...
- Page 5 Installing Interior Mounting Plate Loosen screw to remove cover. AYRD -220- INST FUL Rev F...
- Page 6 Attaching the Cable Assembly AYRD -220- INST FUL Rev F...
- Page 7 Installing Interior Escutcheon AYRD -220- INST FUL Rev F...
- Page 8 Testing Operation Bolt must be in retracted (unlocked) position before installing batteries. AYRD -220- INST FUL Rev F...
- Page 9 Testing Operation AYRD -220- INST FUL Rev F...
- Page 10 Installing Optional Network Module Installing Batteries & Cover "Welcome to Yale Real Living." Tighten screw to replace cover. Congratulations, you've installed the Yale Real Living Touchscreen Deadbolt (YRD220)! ® Continue with Programming Instructions to customize your product. AYRD -220- INST FUL...
- Page 11 Programming Instructions Exterior Escutcheon "P" Key (Return to Previous) Interior Escutcheon Lockout Mode Low Battery Indicator Speaker Privacy Mode Button Master Code must be created before any further programming. Max User Codes = 250 with Network Module. Max User Codes = 25 without. AYRD -220- INST FUL...
- Page 12 Creating Master Code Creating a Master Code must be performed upon installation or after resetting the lock to factory default. Programming and use of lock is not possible until this step has been successfully completed. "Register Master Code. Press the pound key to continue."...
- Page 13 Creating User Codes Master code must be created first. *Max user codes = 250 with Network Module. Max user codes = 25 without. "Menu Mode, enter number, press the pound key to continue." Enter Master code Press Enter User number Press Press (1-25) or (1-250)*...
- Page 14 Unlocking Door with Code Enter Code Press Code Chart Duplicate if necessary PIN Code Management (With Network Module - Up to 250 Users) User Type User Name User # PIN Code Master User ___ User ___ User ___ User ___ User ___ User ___ User ___...
- Page 15 Resetting Lock to Factory Default When lock is reset to factory defaults all user codes (including the Master code*) are deleted and all programming features are reset to original default settings (see below). 1. Remove the battery cover and batteries. 2.
- Page 16 Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) code access. When attempting to enter a code while the unit is in Lockout, the locked padlock will appear on the screen. Automatic Re-lock Time: After a successful code entry and the unit unlocks, it will automatically re-lock after thirty (30) seconds.
- Page 17 Feature Programming Through Menu Mode Using Master code* 1. Touch screen with back of hand or palm to activate. 2. Enter 4-8 digit master code* followed by key. Lock Response: "Menu mode, enter number, press key to continue." 3. Enter digit corresponding to the function to be performed followed by the key.
- Page 18 Programming Troubleshooting Symptom Suggested Action Touchscreen becomes active when pressed w/whole hand. Use a larger area of the hand or fingers and verify contact Lock does not respond – with at least 3 areas. door is open and If touchscreen numbers are visible, check to see if they accessible.
- Page 19 Hardware Troubleshooting Cycle lock in both the locked and unlocked positions. If problems are found: Bolt will not deadlock a. Check for sufficient clearance of the bolt within the strike-side jamb. Correct this by increasing the depth of the pocket for the bolt. b.
- Page 20 ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. YALE, with its unique global reach and range of products, is the world's favorite lock – the preferred solution for securing your home, family and personal belongings.
- Page 21 Yale Real Living Z -Wave Module ® ® ® Installation and Programming Instructions Installing the Z -Wave Module ® IMPORTANT: the batteries must be removed prior to removing and/or inserting the network module: • Remove battery cover. • Remove batteries.
- Page 22 Copyright © 2017, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. YALE, with its unique global reach and range of products, is the world's favorite lock –...
- Page 23 Yale Real Living ZigBee Module ® ® ® Installation and Programming Instructions Installing the ZigBee Module ® IMPORTANT: the batteries must be removed prior to removing and/or inserting the network module: • Remove battery cover. • Remove batteries. • Remove and/or insert network module.
- Page 24 Copyright © 2017, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. YALE, with its unique global reach and range of products, is the world's favorite lock –...
Need help?
Do you have a question about the Real Living YRD220 and is the answer not in the manual?
Questions and answers