Display L2Vpn Mac-Address - HP 6127XLG Series Command Reference Manual

NOTE:
For more information about the command output, see IGMP in
Related commands
igmp host enable

display l2vpn mac-address

Use display l2vpn mac-address to display MAC address entries for VSIs.
Syntax
display l2vpn mac-address [ vsi vsi-name ] [ dynamic ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi vsi-name: Specifies a VSI name, a case-sensitive string of 1 to 31 characters. If you do not specify a
VSI, the command displays MAC address entries for all VSIs.
dynamic: Specifies dynamic MAC address entries learned in the data plane. If you do not specify this
keyword, the command displays all MAC address entries. The MAC address entries include dynamic
remote- and local-MAC entries, remote-MAC entries advertised through VXLAN IS-IS, and manually
added static remote-MAC entries. VXLAN does not support static local-MAC entries.
count: Displays the number of MAC address entries. If you do not specify this keyword, the command
displays detailed information about MAC address entries.
Examples
# Display MAC address entries for all VSIs.
<Sysname> display l2vpn mac-address
MAC Address
0000-0000-000a
0000-0000-000b
0000-0000-000c
0000-0000-000d
--- 4 mac address(es) found
# Display the total number of MAC address entries in all VSIs.
<Sysname> display l2vpn mac-address count
4 mac address(es) found
State VSI Name
Dynamic vpn1
Static vpn1
Dynamic vpn1
Dynamic vpn1
---
IP Multicast Configuration Guide
5
Link ID/Name Aging
1 Aging
Tunnel10 NotAging
Tunnel60 Aging
Tunnel99 Aging
.