Cleaning And Maintenance; Cleaning - Russell Hobbs RHTGC1 Instruction Manual

5. CLEANING AND MAINTENANCE

5.1 Cleaning

Be sure that all control switches are off and your appliance has cooled before
cleaning your oven. Unplug the appliance. The check whether are appropriate
and recommended by the manufacturer before using them your cleaning
materials on your oven. As they may damage the surfaces do not use caustic
creams, abrasive cleaning powders, thick wire wool or hard tools. In case the
liquids that overflow around your oven burn, the enameled parts may be
damaged. Immediately clean the overflown liquids.
Cleaning the Inside of Your Oven
Unplug the oven before cleaning and ensure it has cooled. Wipe the oven with a
soft cloth that has been soaked in soapy water after each use. Later wipe it
with a wet cloth once more and then dry it. It may be required to use a liquid
cleaning material from time to time and make a complete cleaning. Do not
clean with dry/powder cleaners or steam cleaners.
Cleaning of Your Oven Cover
In order to clean the cover of your oven from inside and outside, use a glass
cleaner. Then rinse and dry it with a dry cloth.
Cleaning of Gas Cooker - Hob Part
Lift up the saucepan supports, caps and crowns of hob burners.
•
Wipe and clean the back panel with a soapy cloth.
•
Wash the caps and crowns of hob burners and rinse them. Do not leave
•
them wet, immediately dry them with paper cloth.
After cleaning, make sure that you re-assemble the parts correctly.
•
Do not clean any part of the hob with metal sponge. It may cause the
•
surface to become scratched.
The pan support top surfaces may be scratched in time due to usage. These
•
parts will not get rusted and it is not a production fault.
During cleaning of the hob plate, make sure that no water flows inside the
•
burner cups, as this may block the injectors.
For Customer Services, Spare parts & Warranty Information please call 0845 683 8717
-24-