Resetting After An Alarm, Tamper Or Pa; Unsetting The System - Honeywell Accenta Series Engineer's Manual

Accenta/Optima Engineer's Manual

Unsetting the System

LCD Keypad:
• Enter the premises by the agreed entry route. Thesystem
produces an entry tone. The Power LED is ON and the
Day LED is OFF indicating that the system is set.
• Enter your 4-digit code (0123 default).
• The system unsets with a double beep. The Day LED
comes ON indicating that the system is unset.
• After 30 seconds the Day Mode display appears.
LED Keypad:
• Enter the premises by the agreed entry route. Thesystem
produces an entry tone. The Power LED is ON and the
Day LED is OFF indicating that the system is set.
• Enter your 4-digit code (0123 default).
• The system unsets with a double beep. The Day LED
comes ON indicating that the system is unset.

Resetting After an Alarm, Tamper or PA

The system may be programmed to be reset by the user or the installer. This is dependent on System flags set
up. See Menu 3, Set Up System Flags.
The duration of the audible alarm is subject to the Bell Time (menu 7.1=Set Up Timers.Bell Time)
NOTE: The user can reset a PA or Fire alarm only if the function is enabled in System Flags menu 3.1.4 and
3.1.5. respectively.
User Reset - LCD Keypad:
When system is in alarm or tamper:
• Enter a valid user code.
• Press the [RESET] button. The LED goes OFF.
• The system resets and goes into day mode.
• After 30 seconds the day mode display appears
User Reset - LED Keypad:
• When system is in alarm or tamper:
• Enter a valid user code. The appropriate LED will be
flashing.
• Press the [RESET] button. The LED goes OFF.
• The system goes into day mode. The Day LED is on.
Operating System (cont'd)
Sunday 01-Jan Sunday 01-Jan Sunday 01-Jan
Sunday 01-Jan Sunday 01-Jan
** SYSTEM UNSET ** ** SYSTEM UNSET ** ** SYSTEM UNSET **
** SYSTEM UNSET ** ** SYSTEM UNSET **
S u n d a y S u n d a y S u n d a y
S u n d a y S u n d a y
User Restore User Restore
User Restore User Restore User Restore
Press Reset Press Reset Press Reset Press Reset Press Reset
** SYSTEM UNSET ** ** SYSTEM UNSET ** ** SYSTEM UNSET **
** SYSTEM UNSET ** ** SYSTEM UNSET **
S u n d a y S u n d a y S u n d a y S u n d a y S u n d a y
43
10:30 10:30 10:30 10:30 10:30
[4-digit code]
0 1 - J a n 0 1 - J a n 0 1 - J a n
0 1 - J a n 0 1 - J a n
10:30 10:30
10:30 10:30 10:30
Day Power
TA PA
[4-digit code]
Day Power
TA
PA
[User Code]
[RESET]
0 1 - J a n 0 1 - J a n 0 1 - J a n 0 1 - J a n 0 1 - J a n
10:30 10:30 10:30
10:30 10:30
Day Power
TA PA
[RESET]
Day Power
TA PA