Video Settings (Video) - Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual

Video Settings (Video)

Video settings will adjust items related to the
image, such as size and color.
Choose the settings according to the type of TV,
tuner, or decoder connected to the DVD recorder.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Video," and press ENTER.
The Video Setup appears with the following
options. The default settings are underlined.
SETUP
Settings TV Type :
Video Pause Mode :
Audio Y/Pb/Pr Out Black Level :
Features Progressive Mode :
Options Screen Saver :
Line1 Input :
Easy Setup Line3 Input :
TV Type
Selects the aspect ratio of the connected TV (4:3
standard or wide).
16:9 Select this when connecting to a
wide-screen TV or TV with a
wide mode function.
4:3 Letter
Select this when connecting to a
Box
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
4:3 Pan
Select this when connecting to a
Scan 4:3 screen TV. Automatically
displays a wide picture on the
entire screen and cuts off the
portions that do not fit.
74
4 : 3 Letter Box
Auto
Off
Auto
On
Video
Video
16:9
4:3 Letter Box
4:3 Pan Scan
Note
Depending on the disc, "4:3 Letter Box" may be selected
automatically instead of "4:3 Pan Scan" or vice versa.
Pause Mode (DVDs only)
Selects the picture quality in pause mode.
Auto The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
Frame
The picture, including subjects
that do not move dynamically, is
output in high resolution.
Y/Pb/Pr Out Black Level
Selects the black level (setup level) for the video
signals output from the COMPONENT VIDEO
OUT jacks (page 17).
This setting is not effective when the
PROGRESSIVE indicator lights up on the front
panel and the recorder outputs progressive signals.
On Raises the standard black level.
Select this when the picture
appears too dark.
Off Sets the black level of the output
signal to the standard level.
Normally, select this.