Advertisement
Quick Links
Download this manual
See also:
User Manual
VeraPlus
Advanced Home Controller
Congratulations!
Welcome to Vera Smarter Home Control.
The VeraPlus Advanced Home Controller
provides a world of convenience and
peace of mind.
In this package you'll find:
VeraPlus Controller
AC Power Adapter
Detail Views
1
Power
2
Internet
3
Wi-Fi
4
Z-Wave
Service
5
ZigBee
6
7
Bluetooth
Front
Ethernet Cable
Select
Sync Reset
Back
USB
Ethernet
Power
Advertisement
Related Manuals for Vera VeraPlus
Summary of Contents for Vera VeraPlus
- Page 1 Detail Views Congratulations! Welcome to Vera Smarter Home Control. Power The VeraPlus Advanced Home Controller Internet provides a world of convenience and Wi-Fi peace of mind. Z-Wave Service VeraPlus ZigBee In this package you'll find: Bluetooth Advanced Home Controller Front...
-
Page 2: Installation
Firmly connect the AC Power Adapter to VeraPlus and If you are a new user, click plug it into an AC outlet. VeraPlus has no on/off switch. “I have a new controller” It will power up as soon as you plug in the AC adapter. - Page 4 (Z-Wave is a wireless com- munications system; check the package or specs to see if a device uses Z-Wave.) Before VeraPlus can control a device, it must be included into the Vera system. Vera Custom Device Wizards are available...
- Page 5 Select a device to include. After adding a new device, the VeraPlus Controller will ask you to name it and choose the room it is (or will be) located in. Note: If the device was previously included with a different Z-Wave system, you’ll need to it exclude it before adding with your VeraPlus.
- Page 6 “Generic Z-Wave Device” option. After adding a new device, the VeraPlus Controller will ask you to name it and choose the room it is (or will be) located in. Note: If the device was previously included with a different Z-Wave system, you’ll need to it exclude it before adding with your VeraPlus.
- Page 7 Reset • Press the Select button. Figure 2-1: VeraPlus - Front View • Press the Select button again. The Z-Wave light will begin blinking. • For Include Mode, press the Sync button briefly (less than 1 second). • For Exclude Mode, press and hold the Sync button for at least 2 seconds, then release.
- Page 8 You may need to access these advanced functions if there’s a problem with your system and you need to reset the Z-Wave network, if you want to upgrade to a different model of Vera Controller, to enable an- other controller to operate your VeraPlus, or for other technical situa- tions as described below.
- Page 9 This option is used when Vera is a secondary controller. Backup Z-Wave Network VeraPlus has the ability to back up its Z-Wave network and its configuration settings to be restored on another gateway. This procedure is explained on the page below: http://support.getvera.com/customer/portal/articles/2345058...
- Page 10 Basic Command Class Handling Support for sending Z-Wave Commands The basic command class is controlled by Vera and it is not mapped Z-Wave commands can be sent using the Vera API which will allow to any other Z-Wave Command Class.
Need help?
Do you have a question about the VeraPlus and is the answer not in the manual?
Questions and answers