Hydraulic Jack - Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual

300
Breakdown assistance

Hydraulic jack

Information on the hydraulic jack
The hydraulic jack is located in side compartment
1 above the co-driver's door step.
The jack has a maximum weight of 7.5 kg
depending on the vehicle's equipment. You will
find the maximum load capacity of the jack sta‐
ted on the adhesive label attached to the jack. If
there is a malfunction, please contact a qualified
specialist workshop.
Jack maintenance:
Clean and grease all moving parts after use.
R
Extend and retract the pistons fully every six
R
months.
Removing the pump lever rod and the jack
Requirements:
The co-driver door is open.
R
To open: press down and unclip fasteners
#
on the cover.
Remove the cover.
#
Pull out the holder completely and place it on
#
the step.
Remove jack 2 and the pump lever rod.
#
To close: press the cover firmly so that fas‐
#
teners 1 engage.
1