Maxell MP-EU5002 User Manual
  1. Manuals
  2. Brands
  3. Maxell Manuals
  4. Projector
  5. MP-EU5002
  6. User manual

Maxell MP-EU5002 User Manual

Hide thumbs Also See for MP-EU5002:
Table of Contents

Advertisement

Quick Links

LCD Projector
MP-EU5002
User's Manual (detailed)
Operating Guide – Technical
Supported signals for COMPUTER IN
Resolution (H x V)
720 x 400
640 x 480
800 x 600
832 x 624
1024 x 768
1152 x 864
1280 x 768
1280 x 800
1280 x 1024
1366 x 768
1440 x 900
1600 x 900
1680 x 1050
1600 x 1200
1920 x 1080
1920 x 1200
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152 x 864 (75Hz)
W-XGA (60Hz)
1280 x 800 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
WXGA (60Hz)
WXGA+ (60Hz)
WXGA++ (60Hz)
WSXGA+ (60Hz)
UXGA (60Hz)
Full HD (60Hz)
W-UXGA (60Hz)
Reduced Blanking
H. frequency
V. frequency
(kHz)
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60
68.7
67.5
47.7
49.7
64
80
91.1
47.7
55.9
60
65.3
75
67.5
74
1
Rating
(Hz)
85
VESA
59.9
VESA
72.8
VESA
75
VESA
85
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75
VESA
85.1
VESA
74.5
60
VESA
70.1
VESA
75
VESA
85
VESA
75
VESA
60
VESA
60
VESA
60
VESA
75
VESA
85
VESA
59.8
VESA
59.9
VESA
60
VESA
60
VESA
60
VESA
60
VESA
60
VESA
QM00062-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP-EU5002 and is the answer not in the manual?

Questions and answers

Related Manuals for Maxell MP-EU5002

Summary of Contents for Maxell MP-EU5002

  • Page 1 LCD Projector MP-EU5002 User's Manual (detailed) Operating Guide – Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency Rating (kHz) (Hz) 720 x 400 TEXT 37.9 VESA 640 x 480 VGA (60Hz) 31.5 59.9...
  • Page 2 Supported signals Supported signals for HDMI Resolution (H x V) Signal mode H. frequency V. frequency Rating (kHz) (Hz) 720 x 400 TEXT 37.9 VESA 640 x 480 VGA (60Hz) 31.5 59.9 VESA VGA (72Hz) 37.9 72.8 VESA VGA (75Hz) 37.5 VESA VGA (85Hz)
  • Page 3 Supported signals Supported signals for MHL Resolution (H x V) Signal mode H. frequency V. frequency Rating (kHz) (Hz) 640 x 480 VGA (60Hz) 31.5 59.9 VESA 720(1440) x 480i 480i 15.7 720(1440) x 576i 576i 15.6 720 x 480p 480p 31.5 720 x 576p...
  • Page 4 Connection to the ports Connection to the ports NOTICE input ports of the projector are recessed. COMPUTER IN1 can be output from the COMPUTER IN2/MONITOR OUT port. The way is available only when the MONITOR OUT is selected for the COMPUTER IN2. ( INPUT menu - COMPUTER IN in the Operating Guide) COMPUTER IN1,...
  • Page 5 Connection to the ports (continued) VIDEO RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL(60Hz) QM00062-1...
  • Page 6 Connection to the ports (continued) HDMI1 HDMI2 / MHL HDMI3 10 12 14 16 18 • Type :Digital audio/video connector 11 13 15 17 19 • Audio signal : Linear PCM (Sampling rate; 32/44.1/48 kHz) Signal Signal Signal T.M.D.S. Data2 T.M.D.S.
  • Page 7 Connection to the ports (continued) USB TYPE A USB TYPE B USB A type jack USB B type jack Signal Signal - Data - Data + Data + Data Ground Ground CONTROL D-sub 9pin plug • About the details of RS-232C communication, 5 4 3 2 1 please refer to the section "RS-232C Communication".
  • Page 8 Connection to the ports (continued) To input component video signal to COMPUTER IN ports RCA plugs connectors D-sub plug COMPONENT VIDEO OUT VCR/DVD/Blu-ray Disc player To input component video signal to the COMPUTER IN1 or IN2 port of the projector, use a RCA to D-sub cable or adapter. For about the pin description of the required cable or adapter, refer to the descriptions about COMPUTER IN1 and IN2 port ( QM00062-1...
  • Page 9 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication / Network command table ( 18). Connection Turn off the projector and the computer.

  • Page 10: Communication Settings

    RS-232C Communication (continued) Communication settings 1. Protocol 19200bps,8N1 2. Command format ("h" shows hexadecimal) Byte Number Command Header Data Header Data Setting Action Type code size code Packet Action <SET>Change setting to desired value [(cL)(cH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) by [(bL)(bH)].

  • Page 11: Response Code / Error Code

    RS-232C Communication (continued) 3. Response code / Error code ("h" shows hexadecimal) (1) ACK reply : 06h When the projector receives the Set, Increment, Decrement or Execute item by [Type], and it returns the code. (2) NAK reply : 15h When the projector cannot understand the received command, the projector returns the error code.

  • Page 12: Command Control Via The Network

    Command Control via the Network Command Control via the Network When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser. For details of RS-232C commands, refer to RS-232C Communication / Network command table ( 18).

  • Page 13: Communication Port

    Command Control via the Network (continued) Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Port Settings Click the [Enable] check box to open [Network Port open Control Port1 (Port: 23)] to use TCP #23. Default setting is “Enable”.

  • Page 14: Command Control Settings

    Command Control via the Network (continued) Command control settings [TCP #23] 1. Command format Same as RS-232C communication, refer to RS-232C Communication command format. 2. Response code / Error code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4).
  • Page 15 Command Control via the Network (continued) 2. Response code / Error code ("h" shows hexadecimal) The connection ID is attached for the TCP#23's response / error codes are used. The connection ID is same as the sending command format. (××h : connection ID) (1) ACK reply : 06h + ××h (2) NAK reply : 15h + ××h (3) Error reply : 1Ch + 0000h + ××h...
  • Page 16 Network Bridge Communication Network Bridge Communication This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by LAN communication, an external device that is connected with this projector by RS-232C communication can be controlled from the computer as a network terminal. For details, see the 1.5 Network Bridge Function - Network Guide.
  • Page 17 Network Bridge Communication (continued) Communication settings For communication setting, use the OPTION - SERVICE - COMMUNICATION menu. OPTION menu - SERVICE - COMMUNICATION in the Operating Guide) Item Condition BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps Data length PARITY NONE/ODD/EVEN Start bit...
  • Page 18 RS-232C Communication / Network command table RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting code Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...

  • Page 19: Picture Mode

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code STANDARD BE EF 06 00 83 F5 01 00 BA 30 06 00 NATURAL BE EF 06 00 23 F6 01 00 BA 30 00 00 CINEMA BE EF...
  • Page 20 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 08 FE 02 00 90 30 00 00 User Gamma Increment BE EF 06 00 6E FE 04 00 90 30 00 00 Point 1...
  • Page 21 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code 1 HIGH BE EF 06 00 0B F5 01 00 B0 30 03 00 1 CUSTOM BE EF 06 00 CB F8 01 00 B0 30 13 00 2 MID-1...
  • Page 22 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 49 73 02 00 03 22 00 00 TINT Increment BE EF 06 00 2F 73 04 00 03 22 00 00 Decrement BE EF...

  • Page 23: Auto Adjust Execute

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 B5 82 02 00 02 21 00 00 H SIZE Increment BE EF 06 00 D3 82 04 00 02 21 00 00 Decrement...
  • Page 24 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 3B C2 01 00 50 30 00 00 FRAME LOCK – BE EF 06 00 AB C3 01 00 50 30 01 00 COMPUTER IN1...
  • Page 25 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 31 89 02 00 21 21 00 00 PERFECT FIT Increment BE EF 06 00 57 89 04 00 21 21 00 00 Left Top -H...

  • Page 26: Installation

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code PERFECT FIT Execute BE EF 06 00 29 95 06 00 48 21 00 00 Memory Save-1 PERFECT FIT Execute BE EF 06 00 D5 94 06 00 49 21...
  • Page 27 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 E9 CE 02 00 6B 20 00 00 VOLUME - LAN Increment BE EF 06 00 8F CE 04 00 6B 20 00 00 Decrement...
  • Page 28 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 DA DF 01 00 3B 20 00 00 AUDIO IN1 BE EF 06 00 4A DE 01 00 3B 20 01 00 AUDIO AUDIO IN2...
  • Page 29 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF...
  • Page 30 RS-232C Communication / Network command table (continued) Command Data Command Data Names Names Operation Type Operation Type Header Header Action Action Type Type Setting code Setting code MyScreen BE EF 06 00 FB CA 01 00 00 30 20 00 ORIGINAL BE EF 06 00...
  • Page 31 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code NORMAL BE EF 06 00 FE 78 01 00 20 22 00 00 SEARCH SKIP SKIP BE EF 06 00 6E 79 01 00 20 22 01 00 COMPUTER IN1...
  • Page 32 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code COMPUTER IN1 BE EF 06 00 3A 33 01 00 00 36 00 00 COMPUTER IN2 BE EF 06 00 FA 31 01 00 00 36 04 00 BE EF...

  • Page 33: Flicker Reduction

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 C8 D7 02 00 10 30 00 00 Magnify Position Increment BE EF 06 00 AE D7 04 00 10 30 00 00 Decrement...

  • Page 34: Pjlink Command

    PJLink command PJLink command Commands Control Description Parameter or Response 0 = Standby POWR Power Control 1 = Power On 0 = Standby POWR ? Power Status inquiry 1 = Power On 2 = Cool Down 11 = COMPUTER IN 1 12 = COMPUTER IN 2 23 = VIDEO 31 = HDMI1...
  • Page 35 NAME" of "NETWORK" Manufacturer's Name INF1 ? MAXELL inquiry INF2 ? Model Name inquiry MP-EU5002 Responds with the factory information and so INFO ? Other Information inquiry CLSS ? Class Information inquiry 1 NOTE • The password used in PJLink is the same as the password set in the Web Browser Control.

Table of Contents