TUG Technologies 660 Operation Manual page 75

Operation
Table Operation-2-1 Instrument Panel Description - Ford 2.5L (Continued)
No. Name
7 Conveyor Hand Throttle
8 Morse Shifter
9 Code Toggle Switch
10 Brake Warning Light (Red)
11 Emergency Steering Switch
12 Head Light Switch
13 Ignition Switch (Optional
Location)
14 Left Front Headlight Cover
CD397-Oper
Mobile Belt Loader Model 660
Operation Manual
This knob controls the engine speed only while the
unit is in neutral and the parking brake is applied.
Turn the knob counterclockwise and the engine will
speed up. Depress the hand throttle knob and the
engine will return to idle.
This is the main drive control for forward or reverse
direction. The shifter is labeled: F=Forward,
R=Reverse, and N=Neutral.
Press this switch to read fault codes via the diagnos-
tic lamp.
This light illuminates if the brake system pressure
falls below a preset level.
This switch activates the emergency steering pump.
Press and hold the switch to start the pump, or
release the switch to stop the pump. The emergency
steering pump activates only if hydraulic pressure is
low.
This switch turns the tractor's headlights on or off.
Pressing down turns lights off and pressing up turns
lights on.
This switch starts or turns off the tractor's engine.
This cover is installed below the dash and conceals
the tractor's wiring harnesses.
Description
Operation - 2 - 13