Wait for the Windows welcome window to appear and enter the user’s name and ® password. After 2 or 3 minutes waiting, double click the VIDAS PC icon. ® After the 45 minutes warm-up phase, turn the VIDAS analyzer power switch to OFF.
Calibration menu: To display calibrations and to access various procedure for the calibration. Calibrate When using a new lot Navigation tree: To display the VIDAS ® menus list. Adjustment of the instrument Results menu: To display and analyse results. to the factory data...
Page 4
To modify an analysis request for a patient before running the series of analyses, select the or enter manually “S” . patient from the Predefi ned Section or the Job List, make the necessary modifi cations, Enter the VIDAS test code ®...
Page 5
HOW TO RUN A SERIES OF ANALYSES HOW TO CORRECT ERRORS click on the ERR compartment in the VIDAS status bar. ® click on the VIDAS 1 or 2 icon ® click ont the error in the instrument Menu and read the explanation...
® immediately servicing following a technical • Cleaning of the two optical lenses problem reset it check reconnect it following a • Performing VIDAS • Performing VIDAS ® ® QCV test QCV test QCV test clear it Every 6 Months: •...
Page 7
..........................................• For TV1: If the result of a particular position is outside the range, two new VIDAS QCV tests must be run successively in all the positions in the section ..........................................concerned. If at least one other non-compliant result is produced in the...
Need help?
Do you have a question about the VIDAS and is the answer not in the manual?
Questions and answers