Page 1
ECHNICAL INFORMATION PRODUCT P 1 / 5 Models No. DC18RA Description Charger ONCEPT AND MAIN APPLICATIONS Considering the future demand for slide type 7.2V Li-ion and Ni-MH battery, the above product has been launched with wider changeable range. This new face contains trickle charging function. Its brief benefits are mentioned below.
P 2 / 5 epair CAUTION: Disconnect the charger from the power source for safety before repair/ maintenance ! [1] DISASSEMBLY/ASSEMBLY [1] -1. Terminal Unit DISASSEMBLING 1. Remove four caps 13 and four 4x20 tapping screws. Consequently, charger case complete can be separated from charger case cover.
P 3 / 5 epair [1] DISASSEMBLY/ASSEMBLY [1] -2. Terminal Cover DISASSEMBLING 1. Separate charger case cover from charger case complete. (Fig. 1) 2. Remove PT3x10 tapping screw and disassemble terminal cover. <Note> Be sure to hold two compression springs with your finger so as not to jump out of terminal cover when disassembling terminal cover.
Page 4
P 4 / 5 epair [1] DISASSEMBLY/ASSEMBLY [1] -3. Varistor and Fuse 1) Types of Breakage 1. If fuse is broken, varistor is usually broken by showing the sign of breakage mentioned below. In this case, replace fuse and varistor at the same time. 2.
P 5 / 5 iring diagram Fig. D-1 Cirocco Fan Terminal Unit In this area, put lead wires between the rib and wall. Charging Circuit Wall Bundle the lead wires with band. Be careful, not to pinch the Connector 1 lead wires with the rib of have to be connected charger case cover.