OneTouch Delica Plus Getting Started Manual

Getting Started Guide
OneTouch Delica
®
Make every test Virtually Pain Free
Preparing your lancing device
1
Remove the lancing
device cap
Insert a sterile lancet
2
into the lancing
device and remove
its protective cover
3
Replace the lancing
device cap
Adjust the depth setting
4
Smaller numbers are for
a shallower puncture and
larger numbers for a deeper
puncture.
Cock the lancing device
5
by sliding the button
back until it clicks
Now you can test
Use with OneTouch ® Delica
Before using the OneTouch Delica
®
read the OneTouch ® meter Owner's Booklet and inserts that come with the system.
Plus lancing device
®
® Plus or OneTouch ® Delica
Plus lancing device to test blood glucose, carefully
®
Testing and removing
the used lancet
Puncture your finger
1
Hold the lancing device firmly
against the side of your finger.
Press the release button to
puncture.
Apply the sample
2
Apply the blood sample following
the instructions in your OneTouch
Owner's Booklet for proper sample
application.
3
Remove the lancing
device cap again
Cover the exposed lancet tip
4
Place the lancet protection cover on
a hard surface and push the lancet
tip into the flat side of the disk.
Eject the lancet
5
Holding the lancing device
downwards, push the slider
forward until the lancet comes out.
Push the cap back onto the device.
Replace the lancing
6
device cap
Discard the used lancet carefully
after each use to avoid unintended
lancet stick injuries.
® lancets.
®