Standard Installation - Redarc SBI12-LLD Manual

STANDARD WIRING DIAGRAMS
• Ensure adequately sized cable is used.
• Ensure the auxiliary battery and loads
are properly grounded to a common
chassis earth point.
• Ensure the SBI12-LLD ground wire is
making good contact with the chassis
ground point.
• When using fuses make sure that the
fuse makes a good low resistance
connection.
• Fuse/Circuit Breaker ratings are
dependent on the type of installation
and the size of the loads.
Battery Charger
(LFPXXXX or BCDCXXXXD)
Refer to the Battery Charger's user manual for
appropriate power cable size reccomendations
SBI with External LED
Override
Wire
LED
NO RESISTOR REQUIRED.
OPTION 1
Fuse
Start
Battery

Standard Installation

Override
Wire
LED
Resistor values:
12V = 1k or 24V = 2.2k
Battery
Terminal
Override
Wire
(BLUE)
Fuse
Auxiliary
Battery
SBI with Push Button
for Override and LED
Momentary
Pushbutton
OPTION 2
5
Terminal
SBI12-LLD
Load
Fuse
SBI with Push Button
for Override
5A
Fuse
Override
Wire
OPTION 3
Load
Ground
Wire
(BLACK)
Loads
5A
Fuse
Momentary
Pushbutton