Filter Guide; Replacing Filters - HoMedics Pet Plus ATPET02AU Instruction Manual And Warranty Information

Air Purifier Quick Start and Filter Guide
Quick Start Guide
Quick Start Guide
QUICK START GUIDE:
• Take the air purifier out of the box and remove the clear, protective plastic bag.
• Take the air purifier out of the box and remove the clear, protective plastic bag.
Take the air purifier out of the box and remove the clear, protective plastic bag.
• Place the air purifier on a firm, level surface.
• Place the air purifier on a firm, level surface.
• Place the air purifier on a firm, level surface.
• Make sure the air purifier is off and unplugged to confirm that the filters are firmly in
• Make sure the air purifier is off and unplugged to confirm that the filters are firmly in place and did not • Make sure the air purifier is off and unplugged to confirm that the filters are firmly in
become loose during shipping.
place and did not become loose during shipping.
1. To check filters, open the rear cover by gently pushing down on the release tab on the top of the rear grill
cover. (Fig. 1)
2. Open the grill cover outward until the tabs at the bottom of the grill cover easily slide away from the unit. (Fig.
Air Purifier Quick Start and Filter Guide
2)
Fig. 1
Quick Start Guide
3. The True HEPA filters will be resting inside the unit. Make sure the filters are firmly seated inside of the unit.
(Fig. 3)
• Take the air purifier out of the box and remove the clear, protective plastic bag.
4. Locate the PetPlus Odour Filters in the rear grill cover. Remove the PetPlus filters from the plastic bags they
are shipped in and set aside. Check to make sure the Pre-Filter is seated in place on the frame of the grill
• Place the air purifier on a firm, level surface.
cover. (Fig. 4) Then place the PetPlus Odour Filters back into the grill cover, seating them on the rails, with the
pull tabs facing outward at the top of each filter. (Fig. 5)
• Make sure the air purifier is off and unplugged to confirm that the filters are firmly in
5. Place the tabs at the bottom of the grill cover into the base of the unit. Gently push the grill cover back into
place until you hear a click sound indicating that the grill cover is firmly latched. (Fig. 6)
place and did not become loose during shipping.
Connect the power cord into a standard AC outlet.
Fig. 2
Fig. 1
Fig. 3 Fig. 4
Fig. 2
Fig. 3 Fig. 4
Fig. 5 Fig. 6

Filter Guide

Pre-Filter: Collects hair, fur, and other larger airborne contaminants and particles. It
should be vacuumed clean every 30 days.
PetPlus Odor Filters: Removes odors associated with pet urine, pet feces, litter, and wet
4
Note: Unit will not operate unless filters and grill cover are properly installed.
dog. They should be replaced every 6 months.
TotalClean
place and did not become loose during shipping.
Fig. 1
Air Purifier Quick Start and Filter Guide
TotalClean
place and did not become loose during shipping.
Fig. 2
1. To check filters, open the rear cover by gently pushing
Fig. 1
down on the release tab on the top of the rear grill
cover. (Fig. 1)
2. Open the grill cover outward until the tabs at the bottom
of the grill cover easily slide away from the unit. (Fig. 2)
Fig. 3 Fig. 4
1. To check filters, open the rear cover by gently pushing
Fig. 2
down on the release tab on the top of the rear grill
3. The True HEPA filters will be resting inside the unit. Make
cover. (Fig. 1)
sure the filters are firmly seated inside of the unit. (Fig. 3)
2. Open the grill cover outward until the tabs at the bottom
4. Locate the PetPlus Odor Filters in the rear grill cover.
of the grill cover easily slide away from the unit. (Fig. 2)
Remove the PetPlus filters from the plastic bags they
are shipped in and set aside. Check to make sure the
Fig. 3 Fig. 5 Fig. 4 Fig. 6
Pre-Filter is seated in place on the frame of the grill
3. The True HEPA filters will be resting inside the unit. Make
cover. (Fig. 4) Then place the PetPlus Odor Filters back
sure the filters are firmly seated inside of the unit. (Fig. 3)
into the grill cover, seating them on the rails, with the pull
tabs facing outward at the top of each filter. (Fig. 5)
4. Locate the PetPlus Odor Filters in the rear grill cover.
Remove the PetPlus filters from the plastic bags they
5. Place the tabs at the bottom of the grill cover into the
Note: Unit will not operate unless filters and grill cover are properly installed.
are shipped in and set aside. Check to make sure the
base of the unit. Gently push the grill cover back into
Fig. 5 Fig. 6
Pre-Filter is seated in place on the frame of the grill
place until you hear a click sound indicating that the grill
cover. (Fig. 4) Then place the PetPlus Odor Filters back
cover is firmly latched. (Fig. 6
into the grill cover, seating them on the rails, with the pull
tabs facing outward at the top of each filter. (Fig. 5)
Connect the power cord into a standard AC outlet.
5. Place the tabs at the bottom of the grill cover into the
Note: Unit will not operate unless filters and grill cover are properly installed.
TotalClean
1. To check filters, open the rear cover by gently pushing
down on the release tab on the top of the rear grill
cover. (Fig. 1)
HOW TO USE:
1. ON/OFF AND SPEED SETTINGS
2. Open the grill cover outward until the tabs at the bottom
To turn the air purifier on, press the ON/OFF button on the control panel.
When the air purifier is on, the ON/OFF button on the control panel will be lit and the air purifier will start to
of the grill cover easily slide away from the unit. (Fig. 2)
operate on LOW speed.
Once the air purifier is ON, press the SPEED+ button to increase the fan speed to the MED setting. Press again to
increase the fan speed to HIGH setting. To decrease the fan speed, press the SPEED– button until your desired
setting is reached. The fan speed setting is indicated by the illuminated ring around the paw symbol.
1. To check filters, open the rear cover by gently pushing
3. The True HEPA filters will be resting inside the unit. Make
To turn the air purifier OFF, simply press the ON/OFFbutton on the control panel.
down on the release tab on the top of the rear grill
sure the filters are firmly seated inside of the unit. (Fig. 3)
2. TIMER
cover. (Fig. 1)
There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight) hours, and 12 (twelve) hours. To
activate the timer press the TIMER+ button on the control panel. Each time the + button is pressed, it will display
the successive settings. To return to a setting already passed, press the TIMER– button. Once a timer setting has
been selected, it will remain displayed on the TIMER screen. To operate continuously, cycle down through all
4. Locate the PetPlus Odor Filters in the rear grill cover.
timer settings until no timer setting is displayed.
2. Open the grill cover outward until the tabs at the bottom
Remove the PetPlus filters from the plastic bags they
3. OSCILLATION
of the grill cover easily slide away from the unit. (Fig. 2)
are shipped in and set aside. Check to make sure the To activate the oscillation feature, press the
unit will not automatically realign with foot when oscillation is stopped. To achieve alignment, stop oscillation at
Pre-Filter is seated in place on the frame of the grill the moment the body becomes aligned with the foot.
3. The True HEPA filters will be resting inside the unit. Make cover. (Fig. 4) Then place the PetPlus Odor Filters back 4. REPLACE HEPA FILTER
The REPLACE HEPA FILTER indicator illuminates when it is time to replace the True HEPA Filters.
into the grill cover, seating them on the rails, with the pull sure the filters are firmly seated inside of the unit. (Fig. 3)
5. REPLACE ODOUR FILTER
tabs facing outward at the top of each filter. (Fig. 5)
The REPLACE ODOUR FILTER indicator illuminates when it is time to replace the PetPlus Odour Filters.
4. Locate the PetPlus Odor Filters in the rear grill cover.

REPLACING FILTERS:

Remove the PetPlus filters from the plastic bags they
5. Place the tabs at the bottom of the grill cover into the
REPLACING TRUE HEPA FILTERS
are shipped in and set aside. Check to make sure the
base of the unit. Gently push the grill cover back into For optimal performance, replace every 12 months under normal usage conditions. Once the True HEPA filters
have been replaced, press and hold the REPLACE HEPA FILTER button until it beeps to reset the indicator.
Pre-Filter is seated in place on the frame of the grill
place until you hear a click sound indicating that the grill
To purchase genuine HoMedics replacement True HEPA filters, model ATOFLAU, go back to your retailer where
cover. (Fig. 4) Then place the PetPlus Odor Filters back you purchased your air purifier, or visit www.homedics.com.au.
cover is firmly latched. (Fig. 6
into the grill cover, seating them on the rails, with the pull
REPLACING PETPLUS ODOUR FILTERS
For optimal performance, replace every 6 months under normal usage conditions. Once the Odour Filters have
tabs facing outward at the top of each filter. (Fig. 5)
Connect the power cord into a standard AC outlet.
been replaced, press and hold the REPLACE ODOUR FILTER button until it beeps to reset the indicator.
To purchase genuine HoMedics replacement PetPlus Odour filters, model ATPETODRAU, go back to your retailer
where you purchased your air purifier, or visit www.homedics.com.au.
5. Place the tabs at the bottom of the grill cover into the
base of the unit. Gently push the grill cover back into
place until you hear a click sound indicating that the grill
cover is firmly latched. (Fig. 6
)
Connect the power cord into a standard AC outlet.
button. To stop oscillation, press the
)
)
button a second time. The
5