Sony WEGA KV 27FS320 Operating Instructions Manual page 47

Use the
MTS
press
Multi-Channel
TV Sound
Stereo:
Auto SAP:
Mono:
✍
Press to directly select MTS settings (Stereo, Auto SAP, Mono).
✍
If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output
sound, change your Audio MTS setting to Stereo or Mono.
Use the
Speaker
press
Custom
selection of
On:
audio output
source
Off:
Audio Out Use the
press
Use to control
the TV's volume
Variable:
through a stereo
Fixed:
✍
You can only set Audio Out settings when you have set Speaker to Off.
40
F f
or buttons to highlight one of the following options, then
to select it.
Select when viewing a broadcast in stereo.
Select to have the TV automatically switch to a Second
Audio Program (SAP) when a signal is received.
Select to reduce noise in areas of poor reception.
F f
or buttons to highlight one of the following options, then
to select it.
Select to listen to the sound from the TV speakers with or
without a separate stereo system.
Select to turn off the TV speakers and listen to the TV's sound
only through external audio system speakers.
F f
or buttons to highlight one of the following options, then
to select it.
Adjust the volume through your TV.
Adjust the volume through a connected stereo.