Advertisement
FITTING
Try the optional Cush Fins and all
ear tips for best fit and proper seal.
CUSH FIN
EAR TIP
TROUBLESHOOTING
CAN YOU HEAR MUSIC FROM THE RIGHT EARBUD BUT NOT THE LEFT?
CONNECT/RECONNECT THE LEFT AND RIGHT EARBUDS
If the right earbud is working but no sound is coming out of the left, follow these steps to pair the two earbuds together.
Turn Bluetooth off on your
1
device.
Turn both earbuds off (by
pressing and holding each
earbud button until voice
prompt says 'good bye'
or you see no lights).
Repeat process with
3
LEFT earbud: Press and
hold 15+ seconds on
earbud button.
Release when earbud is
solid white. Once earbuds
connect, the right earbud
will flash blue and white
indicating it is ready to
connect to Bluetooth.
Left earbud will be
solid white.
Note: To avoid having to reconnect the earbuds again, make sure you return the earbuds to the correct spot in the case.
See Charging Earbuds.
ECHOES ON CALLS
If you experience microphone echo/call quality with the JBuds Air, make sure the Cush Fin is not blocking the microphone port.
Microphone covered
Hold the earbud
1
vertical to the ear.
Settings
Bluetooth
Microphone open
Twist in the ear
2
canal to lock in.
When earbuds are off, press and
2
hold 15+ seconds on the RIGHT
earbud button.
While holding, earbud will flash
blue and white.
Release when earbud flashes white.
Turn your device Bluetooth
4
back on.
Select "JLab JBuds Air"
to connect.
Settings
Bluetooth
JLab JBuds Air
Advertisement
Need help?
Do you have a question about the JBuds Air and is the answer not in the manual?
Questions and answers
No sound out of left bud but beeps twice every few seconds. Says hello and goodbye when turned on and off.
If your JLab JBuds Air has no sound in the left earbud and beeps twice every few seconds, try reconnecting the left and right earbuds by following these steps:
1. Turn off Bluetooth on your device.
2. Turn both earbuds off by pressing and holding each earbud button until you hear "goodbye" or see no lights.
3. Press and hold the right earbud button for 15+ seconds until it flashes blue and white, then release.
4. Repeat the process with the left earbud, holding its button for 15+ seconds until it turns solid white, then release.
5. Turn Bluetooth back on your device and select "JLab JBuds Air" to reconnect.
This process pairs the earbuds together and may resolve the issue.
This answer is automatically generated